350-601 Premium PDF & Test Engine Files with 423 Questions & Answers
Get 100% Real 350-601 Exam Questions, Accurate & Verified Answers As Seen in the Real Exam!
Cisco 350-601 exam covers a wide range of topics such as data center infrastructure, security, automation, and networking. 350-601 exam is divided into two parts. The first part covers the implementation and management of data center infrastructure, while the second part focuses on automation and networking. 350-601 exam is designed to test the candidate's understanding of data center infrastructure, including server virtualization, storage, and network architecture.
NEW QUESTION # 109
Refer to the exhibit.
What is the result of this series of commands?
- A. It verifies the firmware update on the server.
- B. It activates the firmware on the next adapter boot.
- C. It updates the firmware on adapter 1/1/1 immediately.
- D. It reboots the server immediately.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Firmware-Mgmt/4 Graphical user interface, text, application, email Description automatically generated
NEW QUESTION # 110
Which statement describes monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect?
- A. Fibre Channel traffic is capable to be monitored as it is encapsulated as FCoE.
- B. The destination port for monitoring must be an unassigned Fibre Channel port.
- C. The monitoring of Fibre Channel traffic is limited to the default VSAN.
- D. Fibre Channel traffic is monitored only on one vHBA per server.
Answer: D
NEW QUESTION # 111
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch. Drag and drop the configuration steps from the into the correct order on the right.
Answer:
Explanation:
Explanation
install the virtualization feature set
Enable the virtualization feature set
Configure the port profile
Configure support for VNTag mode on the interface that connects to the server.
Configure the server to support NIV mode
Configure the vNICs of the server
NEW QUESTION # 112
A storage array must be connected to port ethemet1/10 on a Cisco MDS 9000 Series Switch. In addition, the array must connect using the FCoE protocol and be single-homed. Which configuration meets these requirements?
- A. vlan database
vlan 101 vsan
vsan 101 fcoe
vsan 101 interface vfc 10
interface ethemet1/10
switchport mode trunk
bind interface vfc 10
fcoe vsan 101 - B. vlan database
vlan 101 fcoe
vsan 101 enable
interface vfc 10 vsan 101
interface vfc 10
switchport mode fcoe
switchport access vlan 101
bind interface ethenet1/10 - C. interface vfc 10
switchport mode f
bind interface ethernet 1/10
vsan database
vsan 101
vlan 101
fcoe vsan 101
vsan 101 interface vfc 10 - D. vsan database
vlan 101
vsan 101
fcoe vsan 101 interface vfc 10
interface 1/10
switchport mode e
fcoe vfc 10
Answer: C
Explanation:
We must use mode f, because in a switch, on a port which connects to a node, we configure an F port (fabric port). On the endhost (array/storage) side, this port is an N (node) port.
NEW QUESTION # 113
Which statement about the impact of a rolling EPLD upgrade on a Cisco MDS 9000 Series Switch is true?
- A. Only the modules that are being upgraded are disrupted.
- B. An EPLD upgrade is nondisruptive.
- C. The upgrade can be performed from the standby supervisor module.
- D. All modules on the switch are disrupted.
Answer: A
NEW QUESTION # 114
Multiple roles are applied to a user on the Cisco MDS 9000 Series Switch. Which statement is true?
- A. Access to a command takes priority over being denied access to a command.
- B. Any commands that have conflicting settings between roles are denied.
- C. The first role assigned takes precedence over subsequent roles.
- D. The last role assigned takes precedence over previous roles.
Answer: A
NEW QUESTION # 115
The EPLD update of the supervisor module has been scheduled for several cisco MDS 9000 switches. What will be the impact of the update?
- A. The redundant supervisor lakes while the EPLD update is in progress and the switch is rebooted after the upgrade is completed.
- B. All traffic is stopped for the duration of the EPLD update and the switch is rebooted after the upgrade is completed.
- C. All control plane traffic is stopped for the duration of the EPLD update and the switch remain operational for the duration of the upgrade.
- D. The redundant supervisor lakes over while the EPLD update is in progress and there is no service disruption.
Answer: B
Explanation:
Explanation
An EPLD update of the supervisor module of fabric switches (Cisco MDS 9100, Cisco MDS 9200, and Cisco MDS 9300 Series switches) is disruptive since there is no redundant supervisor to take over while the update is in progress. All traffic through the system is stopped for the duration of the update and the switch is rebooted after the upgrade has completed. The update may take up to 30 minutes to complete.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/release/notes/epld/epld_rn.html#pg
NEW QUESTION # 116
An engineer must back up the Cisco UCS configuration. The backup job must meet these requirements:
* It must use the TCP protocol.
* Client identification must be verified before data is transmitted.
* The backup must contain all the system and logical configuration settings.
* The operations team requires that the backup file is in a human-readable format.
Which set of configurations must the engineer use?
- A. Type: Logical configurationProtocol: TFTP
- B. Type: All configurationProtocol: SCP
- C. Type: Full stateProtocol: SFTP
- D. Type: System configurationProtocol: SFTP
Answer: B
Explanation:
The correct answer is C because it is the only option that satisfies all four requirements at the same time.
Cisco UCS Manager documentation states that an All configuration backup is an XML file containing all system and logical configuration settings. Because it is XML, it is human-readable, which matches the operations team requirement. By contrast, a Full state backup is a binary snapshot, so it is not human- readable, and System configuration or Logical configuration alone do not include both sets of settings.
For the transport requirement, SCP is correct because Cisco UCS supports backup transfer over FTP, TFTP, SCP, or SFTP, and SCP runs over SSH/TCP, providing authenticated, secure file transfer before the actual data copy occurs. TFTP is not valid here because it uses UDP and does not provide secure identity verification. Although SFTP also uses SSH/TCP, option D fails because Full state is binary, and option A fails because System configuration does not include all logical settings. Therefore, the only fully correct combination is All configuration + SCP.
NEW QUESTION # 117
An engineer is implementing an import operation in Cisco UCS Manager.
What is the impact of performing this operation?
- A. A configuration can be imported from a higher release to a lower release.
- B. Only a configuration file that was exported from the same Cisco UCS Manager can be imported.
- C. Information can be modified on the management plane only.
- D. An import operation can be scheduled.
Answer: C
NEW QUESTION # 118
A network engineer must restore the running configuration on a Cisco Nexus 5000 Series Switch to an existing snapshot called "stable1". The restore procedure should proceed only if no errors occur. Which configuration should be used to accomplish this goal?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
Explanation:
The correct command to restore the running configuration on a Cisco Nexus 5000 Series Switch to an existing snapshot called "stable1" is found in Option C. The command rollback checkpoint stable1 best-effort running-config best-effort ensures that the restore procedure will proceed only if no errors occur, which aligns with the requirement stated in the question. The "best-effort" parameter is crucial as it indicates that the rollback should only proceed if it can be completed without any errors.
NEW QUESTION # 119
Which Cisco Nexus Dashboard service distributes Cisco ACI network configuration policies and templates to different data centers?
- A. Nexus Orchestrator
- B. Nexus Data Broker
- C. Nexus Fabric Controller
- D. Nexus Insight
Answer: A
NEW QUESTION # 120
Refer to the exhibit.
Which statement about the default gateway configuration of the vPC is true?
- A. N7K-1 acts as the default gateway for all traffic.
- B. Either switch can act as the active default gateway.
- C. N7K-2 forwards traffic that is destined for the default gateway by using the peer link.
- D. N7K-2 acts as the default gateway for all traffic.
Answer: B
NEW QUESTION # 121
Which data interchange format is presented in this output?
- A. XML
- B. JSON
- C. YAML
- D. CSS
Answer: B
NEW QUESTION # 122
Refer to the exhibit.
Which command needs to be added to the line starling with the "file" keyword to have the generated running-config file with the name 'fusion-config_' and current date?
- A. string(('fusion-config_') + date)
- B. ('fusion-config_') + date
- C. str.('fusion-config_') + date
- D. ('fusion-config_ + date')
Answer: C
NEW QUESTION # 123
A new employee must be granted access to add VLANs into an existing Cisco UCS Manager and configure NTP synchronization with date and time zone settings. Which two privileges must be granted to the employee to complete the task? (Choose two.)
- A. Service Profile Config (Is-config)
- B. Service Profile Compute (Is-compute)
- C. Service Profile Network Policy (Is-network-policy)
- D. Ext LAN Config (ext-lan-security)
- E. Ext LAN Policy (ext-lan-policy)
Answer: D,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/Reference-Docs/Privileges/4-1/b-UCSM-Privileges-4_1.pdf NTP can be configured only with EXT LAN Security.
VLAN can be added using the following privileges:
- Ext Lan Config (ext-lan-config)
- Ext Lan Policy (ext-lan-policy)
service profiles will add VLANs to vNICs only if they are configured to UCS manager. So service profile is not valid solution.
NEW QUESTION # 124
Refer to the exhibit.
What is the result of this series of commands?
- A. It verifies the firmware update on the server.
- B. It activates the firmware on the next adapter boot.
- C. It updates the firmware on adapter 1/1/1 immediately.
- D. It reboots the server immediately.
Answer: B
NEW QUESTION # 125 
Refer to the exhibit. A storage engineer must monitor the traffic from the file server to the FC analyzer. The file server and the database use the same storage array. Which configuration must be applied to the Cisco MDS 9000 Series Switch to accomplish this goal?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
Explanation:
The configuration must ensure that the SPAN session captures traffic from the file server's VSAN to the destination interface connected to the FC analyzer. The commands provided in the exhibit show the setup of a SPAN session with the destination interface as port-channel 2 and the source interface as VSAN 100, which is likely the VSAN associated with the file server.
References := For more detailed information and step-by-step guidance on configuring SPAN sessions on Cisco MDS 9000 Series Switches, you can refer to the official Cisco documentation on Implementing and Operating Cisco Data Center Core Technologies (DCCOR) available at Cisco's training and certifications page and the Cisco Community knowledge base. These resources provide comprehensive insights into deploying, securing, operating, and maintaining Cisco data center infrastructure, including the Cisco MDS Switches.
NEW QUESTION # 126
Which two methods are available to manage an ACI REST API session authentication when a user is unauthenticated? (Choose two.)
- A. POST to aaaLogin
- B. POST to aaaUserLogin
- C. GET aaaRefresh
- D. GET to aaaListDomains
- E. DELETE to aaaLogout
Answer: A,C
NEW QUESTION # 127
Refer to the exhibit.
An engineer is configuring a VSAN on the network Which option must be selected to create the VSAN?
- A. Fabric B
- B. Fabric A
- C. Common/Global
- D. FC Zoning Enabled
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/nx-os/configuration/guides/fabric/fabric
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-central/GUI-User-Guides/Storage-Mgmt/1-5/
NEW QUESTION # 128
Refer to the exhibit.
What is a characteristic of the UUID in the service profile presented.
- A. vendor assigned
- B. unique system generated
- C. allocated from a UUID pool
- D. based on the hardware
Answer: C
NEW QUESTION # 129 
Refer to the exhibit. Which Cisco MDS 9700 Series Switch module EPLDs are upgraded?
- A. PSU
- B. standby supervisor
- C. fan
- D. fabric
Answer: B
Explanation:
The correct answer is C. standby supervisor.
From the exhibit, the command output clearly shows:
Module 6 SUP Yes disruptive Module Upgradable and later confirms:
Module 6 EPLD upgrade is successful and 6 SUP Success.
This indicates that the EPLD upgrade was performed on a Supervisor (SUP) module, specifically module 6. In Cisco MDS 9700 architecture, supervisor modules operate in a redundant pair (active and standby). When EPLD upgrades are performed, Cisco best practice and system behavior typically upgrade the standby supervisor first, because it allows the system to maintain control-plane continuity and minimizes disruption.
The output does not mention PSU, fan, or fabric modules, eliminating options A, B, and D. The explicit reference to SUP confirms that the upgrade applies to a supervisor module.
Thus, based on the module type shown in the output and standard Cisco upgrade behavior, the EPLD upgrade is applied to the standby supervisor, making C the correct answer.
NEW QUESTION # 130
An engineer is performing an ISSU upgrade on the Cisco MDS 9000 Series Switch. What is the impact on the control plane of the switch?
- A. It remains up throughout the update.
- B. It remains down until the next reboot.
- C. It remains down for more than 80 seconds but less than 140 seconds.
- D. It is down for less than 80 seconds.
Answer: D
Explanation:
Nondisruptive upgrades on these fabric switches disrupts the control plane for not more than 80 seconds. The software upgrade might be disruptive if the upgrade progresses beyond when it can be stopped gracefully or if a failure occurs.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/upgrade/guides/nx- os/upgrade.html
NEW QUESTION # 131
Refer to the exhibit.
What is configured as a result of running these commands?
- A. reverse lookup for outbound packets
- B. loose unicast RPF
- C. IP Source Guard
- D. strict unicast RPF
Answer: D
NEW QUESTION # 132 
Refer to the exhibit. Which action completes the vPC domain implementation?
- A. Add the vPC member ports to the vPC channel group.
- B. Configure the system MAC on the vPC domain.
- C. Allow VLANs on the vPC peer link member interfaces.
- D. Include the VRF management on the vPC domain.
Answer: A
Explanation:
Completing the vPC domain implementation requires adding the vPC member ports to the vPC channel group. This action ensures that all member ports are correctly bundled into the vPC, allowing for consistent forwarding behavior and redundancy across the vPC peer switches2.
NEW QUESTION # 133
......
Cisco 350-601 exam is a computer-based exam that consists of 90-110 questions that need to be completed in 120 minutes. 350-601 exam is available in English and Japanese and can be taken at any Pearson VUE testing center. To pass the exam, candidates need to score at least 825 out of 1000 points. 350-601 exam fee is $400, and candidates can retake the exam after a 5-day waiting period. The Cisco 350-601 exam is ideal for network engineers, system administrators, and data center professionals who are responsible for implementing and managing data center technologies in large organizations.
350-601 Premium Files Practice Valid Exam Dumps Question: https://www.examsreviews.com/350-601-pass4sure-exam-review.html
Practice with 350-601 Dumps for CCNP Data Center Certified Exam Questions & Answer: https://drive.google.com/open?id=1cPwbYYCGmg3YDvpEk2_l2o40MMETlN_z