(PDF) Aruba Certified Switching Associate (ACSA) V1 HPE6-A72 Exam and Certification Test Engine
Use HPE6-A72 Exam Dumps (2021 PDF Dumps) To Have Reliable HPE6-A72 Test Engine
Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam Certification Path
Test Preparation teaches how the exam questions can to be decoded. Our Exam Preparedness: Aruba Certified Switching Associate (HP HPE6-A72)â Technical arrangement course is delivered in multiple configurations: study hall preparing for learning or taking an interest in a physical homeroom with an Approved Learner. Free media preparing for learning whenever it is suitable for you. The course surveys test inquiries in each branch of knowledge and how the themes tried ought to be seen to such an extent that off base answers are easier to stay away from. Our course will help you in tracking down the correct answers.
Learning Path:
- Learn Dynamic RF Management
- Learn Functions, features, and capabilities of Aruba single-site on-premise enterprise solutions
- Go through Aruba Networksâs resource library
- Learn WLAN basics and Aruba Architectures
- Learn Guest Access
Understanding functional and technical aspects of Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam Access Control Policy
The following will be discussed in HP HPE6-A72 dumps:
- IPv4
- DHCP server arrangement in switches
- Introduction to ArubaOS-CX and characteristic set
- VLAN origin
- Part 1 of Packet Delivery
- Three-way Handshake
- Switching Portfolio (ArubaOS switches & ArubaOS-CX switches) is this introducing both portfolios on a pair of slides and some slides on ArubaOS-CX hardware architecture, and software architecture
- Describe the details of Hewlett Packard Enterprise (HPE) OneView licensing and licensing-problemscenarios
- 2-Tier versus 3-Tier ranking
- Outline the environmentsthe virtual appliance can be hosted in
- Internet Control Message Protocol and reachability testing tools
- Explain how to set up an email notification when a status alert is generated
- Entering Aruba OS-CX
- Describe how the HPE OneView Environmental Resource Manager (ERM) isintegrated into the data center
- Table of MAC addresses
- Explain how to back up and restore an HPE OneView appliance
- Describe the key resource health monitoring operations of Hewlett Packard Enterprise (HPE) OneView
- TCP Header â Port Numbers
- List optionsfor HPE OneView product support
- Switchports vs. Routed ports
- VLAN advantages
- All the Networking devices: Switches, Routers, Multilayer Switches, APs, Mobility Controllers, Firewalls, Servers etc
- Outline the benefits of the composer over virtual appliance
- UPD
- ARP table
- Identify and describe the common management and automation solution building blocksincluding, Security, - Monitoring, Image Repository, Config Mgmt
- Summary
- Play logs, version, interfaces, transceivers, configuration
- Immediate levels & navigation
- TCP Header
- Explain how HPE OneView collects and displays utilization data
- Power over Ethernet
- Frames of Ethernet
- Broadcast domains
- Context-sensitive aid
- Explain how to access predefined reports about environment statusin OneView
- Describe the ERM topology configuration process
- Describe the processfor addresses and identifiers
- Authorizing interfaces
- Link Layer Discovery Protocol
- Sequence Numbers
NEW QUESTION 25
Match the term to the correct description.
Answer:
Explanation:
NEW QUESTION 26
What connectivity commands are available on AOS-CX switches? (Choose two.)
- A. netstatus
- B. pathping
- C. traceroute
- D. ping
- E. tracert
Answer: C,D
NEW QUESTION 27
Which command will suppress LLDP messages from egressing on a given port while still allowing LLDP to be enabled on the switch?
- A. switch(config)# no lldp
- B. switch(config-if)# no lldp transmit
- C. switch(config-if)# no lldp receive
- D. switch(config-if)# no lldp interface (port) transmit
Answer: B
NEW QUESTION 28
Match each description to the correct management tool for Aruba AOS-CX.
Answer:
Explanation:
NEW QUESTION 29
What is Deep Packet Inspection?
- A. a concept that applies to firewalls, when examining packets only up through Layer 4
- B. a function of Policy Based Routing that examines the entire IPv4 header to forward traffic based on factors other than destination address
- C. a machine learning method of packet inspection for the purpose of choosing which dynamic routing protocol to automatically assign
- D. a firewall process of examining the packet header all the way to Layer 7 in order to determine if the packet should be permitted or denied
Answer: D
NEW QUESTION 30
What is a benefit of choosing a 3-Tier design with routing at the Aggregation layer?
- A. Connecting WAN/MPLS and Data center access to the Aggregation layer
- B. Using access control lists (ACLs) at the Core to improve performance
- C. Shifting endpoint access to the Aggregation layer from the Access layer
- D. Better Core router performance by offloading processing
Answer: D
NEW QUESTION 31
The section in blue can be ignored.
SW1(config)# interface 1/1/1-1/1/2
SW1(config-if-<1/1/1-1/1/2)# vlan access 2
SW1(config-if-<1/1/1-1/1/2)# exit
SW1(config)# interface 1/1/11-1/1/17
SW1(config-if-<1/1/11-1/1/17)# vlan access 17
SW1(config-if-<1/1/11-1/1/17)# exit
After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: D
NEW QUESTION 32
Which two statements accurately describe the features of NetEdit? (Choose two.)
- A. NetEdit supports viewing and editing multiple devices using a single deployment plan.
- B. NetEdit can perform configuration and compliance validation.
- C. NetEdit can be used to configure and validate any third-party device that supports SSH and REST access.
- D. NetEdit includes trial licensing for up to 10 nodes.
- E. NetEdit can run on a mobile device using Android or Apple IOS.
Answer: A,B
NEW QUESTION 33
Match the term to the correct description.
Answer:
Explanation:
NEW QUESTION 34
Click on the colored box that corresponds with the line that best represents Unicast traffic flow.
Answer:
Explanation:
NEW QUESTION 35
Refer to the exhibit
What is true regarding VLAN 50 according to the diagram above?
- A. VLAN 50 is assigned only to Trunk ports which is why no ports are listed under interfaces.
- B. VLAN 50 is part of a switched virtual interface (SVI) that was never routed causing it to be down.
- C. Since VLAN 50 has not been assigned to any enabled physical port, the status is down.
- D. VLAN 50 was never added to the vlan-database and therefore is in a down state.
Answer: C
NEW QUESTION 36
Refer to the exhibit.
What commands will successfully enable the SVI for vlan 100 on interface 1/1/1 to produce the results displayed in the command show ip interface brief in the exhibit below?
- A. Access-1(config-if)# vlan 100
Access-1(config-vlan)# ip address 10.1.1.1/24 - B. Access-1(config)# interface 1/1/1
Access-1(config-if)# vlan trunk permit vlan 100
Access-1(config-if)# interface vlan 100
Access-1(config-if-vlan)# ip address static 10.1.1.1/24 - C. Access-1(config)# interface vlan 100
Access-1(config-if-vlan)# ip address 10.1.1.1/24 - D. Access-1(config)# interface 1/1/1
Access-1(config-if)# routing
Access-1(config-if)# interface vlan 100
Access-1(config-if-vlan)# ip address 10.1.1.1/24
Answer: C
NEW QUESTION 37
What are two features of the three-tier designs? (Choose two.)
- A. adds a distribution layer to free up resources from the Core for improved performance and routing throughput
- B. removes the distribution layer in favor of a spine-leaf design used in modern data center deployments
- C. is considered legacy by requiring a large flat layer-two broadcast domain from Core to Access and should be avoided
- D. uses only Layer 2 access on the Access and the Core with Layer 3 routing and access control provided at the distribution layer
- E. a more scalable design over by leveraging a distribution layer to handle Layer 3 routing and access control in large deployments
Answer: A,E
NEW QUESTION 38
You need to remote into an AOS-CX switch using SSH in order to update the management IP address for future connections. Unfortunately, you mis-configured the IP address and are now locked out of the switch.
What command could you have issued before making changes that would have recovered the original switch configuration after ten minutes?
- A. boot system secondary 10
- B. checkpoint rollback 10
- C. checkpoint auto 10
- D. checkpoint auto confirm 10
Answer: C
NEW QUESTION 39
Which command can be used to find the serial number of an Aruba OS-CX switch?
- A. The command show running-configuration
- B. The command show system
- C. The command inventory
- D. The command version
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 40
Click on the colored box that corresponds with the line that best represents Broadcast traffic flow.
Answer:
Explanation:
NEW QUESTION 41
Which two options are correct regarding the IEEE 802.11ax standard? (Choose two.)
- A. allows transmissions of up to 4.8Gbps
- B. operates in both the 2.4GHz and 5GHz radios bands
- C. operates only in the 5GHz similar to 802.11ac
- D. is an emerging satellite connection standard to allow wireless access anywhere in the world
- E. is the first WLAN standard to no longer use electromagnetic signals to transmit data
Answer: A,B
NEW QUESTION 42
What are two mechanisms supported on AOS-CX 6300 switches used in Multi-active Detection to determine the status of the Primary member? (Choose two.)
- A. Peer switch-based detection
- B. BFD
- C. Loopback keepalives
- D. Management interface split detection
- E. ARP-based
Answer: D,E
NEW QUESTION 43
......
HPE6-A72 Dumps Full Questions with Free PDF Questions to Pass: https://www.examsreviews.com/HPE6-A72-pass4sure-exam-review.html
HPE6-A72 PDF Recently Updated Questions Dumps to Improve Exam Score: https://drive.google.com/open?id=1sgZrv42Kba9hFhM6NXv3MqfBaooFtCIw