C_TS411_2021 Questions Pass on Your First Attempt Dumps for SAP Certified Application Associate Certified
C_TS411_2021 Practice Test Pdf Exam Material
SAP C_TS411_2021 certification exam is designed for individuals who want to validate their knowledge and skills in SAP S/4HANA R&D Engineering. Certified Application Associate - SAP S/4HANA R&D Engineering certification is ideal for professionals who want to enhance their career prospects in the field of SAP S/4HANA R&D Engineering. C_TS411_2021 exam is intended to test the candidate's understanding of SAP S/4HANA R&D Engineering, including its architecture, functions, and features.
SAP C-TS411-2021 Exam is a certification exam designed for individuals who want to prove their expertise in SAP S/4HANA R&D Engineering. C_TS411_2021 exam validates the candidate's knowledge of SAP S/4HANA, including the ability to implement, customize, and maintain the SAP S/4HANA system. Certified Application Associate - SAP S/4HANA R&D Engineering certification also confirms the candidate's ability to configure and implement solutions in the SAP S/4HANA R&D Engineering module, as well as their ability to troubleshoot and resolve issues related to the module.
NEW QUESTION # 46
You are working with VC Modeling Environment PMEVC. Complete object dependencies are created by drag & drop of one or more characteristic values into a BOM item.What can be created with this drag & drop functionality?Note: There are 2 correct Answers to this question.
- A. Selection conditions only
- B. Selection conditions and procedures
- C. Local and global object dependencies
- D. Local object dependencies only
Answer: B,C
NEW QUESTION # 47
Where can you specify a processing sequence during an assignment?
- A. Constraint Nets
- B. Pre- and Selection Conditions
- C. Constraints
- D. Procedures
Answer: D
NEW QUESTION # 48
Which of the following objects can you connect with a revision level?Note: There are 2 correct Answers to this question.
- A. Material Master
- B. Classes
- C. Work Center
- D. Document
Answer: A,D
NEW QUESTION # 49
What is the meaning of the operation number in the routing?
- A. It determines the sequence in which the operations are processed. The increment has no significance.
- B. It determines the sequence in which the operations are processed. The increment contains wait time and move time.
- C. Similar to the BOM, it is only a sort sequence. The increment has no significance.
- D. It determines the sequence in which the operations are processed. The increment contains time buffers (float before and after production).
Answer: D
NEW QUESTION # 50
You connected characteristics inside one class to organizational areas. What are the benefits?Note: There are 2 correct Answers to this question.
- A. A check for the same classification is only possible inside one organizational area.
- B. Users can always see all characteristics for all areas.
- C. Users can only work with characteristics depending on the authorization for a particular organizational area.
- D. A check for the same classification is possible for all organizational areas.
Answer: A,D
NEW QUESTION # 51
There are item categories that are only allowed in configurable BOMs.What do you have to keep in mind when working with configurable routings?Note: There are 3 correct Answers to this question.
- A. Alternative sequences may only be used in configurable routings.
- B. All production resources/tools catgories can be used in non-configurable and configurable routings.
- C. All sequence categories can be used in non-configurable and configurable routings.
- D. Equipment as production resources/tools may only be used in configurable routings.
- E. All types of operation can be used in non-configurable and configurable routings.
Answer: A,D,E
NEW QUESTION # 52
The processing mode is set in the configuration profile and in the object dependencies. What needs to be taken into account?Note: There are 3 correct Answers to this question.
- A. The processing mode of object dependencies assigned to BOM and routing must always be "Classic" (independent of the configuration profile).
- B. The processing mode of object dependencies assigned to the configuration profile must be the same as that of the configuration profile.
- C. The processing mode of object dependencies assigned to BOM and routing must be the same as that of the configuration profile.
- D. The processing mode of dependencies assigned to characteristics and characteristic values must always be "Advanced Variant Configuration" (independent of the configuration profile).
- E. The processing mode of object dependencies assigned to characteristics and characteristic values must be the same as that of the configuration profile.
Answer: B,C,E
NEW QUESTION # 53
Working with the document status, what should you keep in mind?Note: There are 2 correct Answers to this question.
- A. It can only be defined plant specific.
- B. It can be set at object link level.
- C. It can be defined depending on document type.
- D. It can be defined as a status network.
Answer: C,D
NEW QUESTION # 54
Which configuration processes/scenarios are supported for both processing modes?
- A. Plan./Production Order, Sales Order (SET) only
- B. Sales Order (SET), Order BOM only
- C. Plan./Production Order, Order BOM, Sales Order (SET)
- D. Plan./Production Order, Order BOM only
Answer: C
NEW QUESTION # 55
Which configuration process/scenario requires subitems in sales orders?
- A. Order BOM
- B. Planned/Production Order with BOM explosion
- C. Sales Order (SET processing)
- D. Planned/Production Order without BOM explosion
Answer: C
NEW QUESTION # 56
The Work Center provides default values for the routing.Which of these default values is a mandatory entry if an operation is created in the routing?
- A. Work Center
- B. Standard text key
- C. Control key
- D. Standard value key
Answer: C
NEW QUESTION # 57
What is the advantage of the Engineering Workbench in comparison to standard material BOM and routing maintenance?Note: There are 3 correct Answers to this question.
- A. Material BOMs and routings can be processed together.
- B. Only the Engineering Workbench allows you to make changes to material BOMs and routings using Engineering Change Management.
- C. You can save changes to material BOMs and/or routings and release them for other persons without leaving the Engineering Workbench.
- D. Material BOMs, routings, work centers, and material masters can be created and changed.
- E. Using a special, optional lock logic, several people can make changes to the same material BOMs and/or routings.
Answer: A,C,E
NEW QUESTION # 58
Why do you need a material BOM header status?
- A. It controls the usage of the material BOM items inside logistic chain.
- B. It controls the usage of the material BOM by a certain user.
- C. It controls the usage of the material BOM inside logistic chain.
- D. It controls the usage of an assembly indicator inside material BOM.
Answer: C
NEW QUESTION # 59
Which data base tables use the Product Master?
- A. Tables for Master Data Management.
- B. Tables only for Material Master.
- C. Tables only for Product Master.
- D. Tables for Product Master and Material Master.
Answer: B
NEW QUESTION # 60
You can use the syntax element $set_pricing_factor for pricing in object dependencies.What do you need to consider?Note: There are 2 correct Answers to this question.
- A. You cannot use zero as a factor in $set_pricing_factor.
- B. $set_pricing_factor sets the variant condition and adds a factor to it. The variant condition must not already be assigned.
- C. $set_pricing_factor adds only one factor. The variant condition must already be assigned.
- D. Negative factors must not be used in $set_pricing_factor.
Answer: A,B
NEW QUESTION # 61
What do you have to keep in mind when overwriting characteristic for a specific class?
- A. This change applies only to the characteristic, when it is used in this class.
- B. The status of this characteristic is automatically set to incomplete.
- C. This change applies only to the characteristic, when it is used in every class.
- D. The status of this characteristic is automatically set to locked.
Answer: A
NEW QUESTION # 62
You can assign material components to operations.What needs to be taken into account?
- A. You can only assign material components that have also been assigned to the routing as production resources and tools.
- B. You can only assign material components that were previously assigned to the header material.
- C. You can only assign each material component, when the material master exists and is known in the plant.
- D. You can only assign material components that are components of a material BOM.
Answer: A
NEW QUESTION # 63
......
SAP C-TS411-2021 certification exam is designed for professionals who want to validate their knowledge and skills in SAP S/4HANA R&D Engineering. Certified Application Associate - SAP S/4HANA R&D Engineering certification program is intended for individuals who wish to work with this application as consultants, architects, or developers. The SAP C-TS411-2021 certification exam is an excellent opportunity for professionals to advance their careers and demonstrate their expertise in the field.
C_TS411_2021 [Aug-2023] Newly Released] Exam Questions For You To Pass: https://www.examsreviews.com/C_TS411_2021-pass4sure-exam-review.html
C_TS411_2021 Answers C_TS411_2021 Free Demo Are Based On The Real Exam: https://drive.google.com/open?id=1wLylb1FmV4FUF9EhNCaLcw-ZJPhX8V82