[Dec 23, 2021] VCS-278 Exam Dumps - Veritas Practice Test Questions
New Real VCS-278 Exam Dumps Questions
Veritas VCS-278 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Configure NetBackup 8.1.2 | -Describe how to configure various master/media/client settings and host properties using the NetBackup administration console. -Describe how to configure removable media (tape), volume pools, volume groups, and media manager storage units. -Describe how to configure disk and cloud storage, storage units, and storage unit groups. -Describe how to configure and utilize backup policies. -Explain how to implement specialized backup solutions including synthetic backups, True Image Restore (TIR), multiple data streams, checkpoint restart, and the use of backup duplication solutions such as disk staging, Storage Lifecycle Policies, Auto Image Replication, and NetBackup Accelerator. -Describe the function, uses, configuration, and administration of the NetBackup deduplication options, such as media server deduplication, client-side deduplication, optimized duplication, and storage servers. -Describe how to perform catalog backup configuration tasks. |
| Tune NetBackup 8.1.2 | -Analyze, optimize, and tune NetBackup. |
| Monitor and Maintain NetBackup 8.1.2 | -Describe how to manage tape devices and tape media. -Describe image management concepts and how to use the NetBackup administration console to verify, expire, import, and manually duplicate backup images. -Describe how to manage NetBackup disk and cloud storage. -Interpret available reports to verify and monitor NetBackup. -Describe how and when to prioritize, cancel, suspend, resume, restart, retry or manually run backup and duplication jobs. -Describe how to initiate, prioritize, and monitor NetBackup restore jobs. -Describe how to manage NetBackup Security (e.g., RBAC, host certificates). -Describe how to install client updates (e.g., VxUpdate). |
| Troubleshoot NetBackup 8.1.2 | -Interpret status codes and job details in order to diagnose and troubleshoot failed jobs. -Troubleshoot devices and media, including connectivity between master, media, and client. -Troubleshoot common issues related to NetBackup disaster recovery including recovering the NetBackup catalog. |
NEW QUESTION 110
Consider the configuration information for a single UNIX client displayed below.
Allow Multiple Data Streams is enabled. ALL_LOCAL_DRIVES is specified.
Media multiplexing is set to 6.
Three tape drives are available in the storage unit and multiplex per drive is 2.
Max Jobs per Client is set to 8.
The client has five local file systems with no exclude list.
How many concurrent data streams will there be when the policy runs?
- A. six
- B. five
- C. two
- D. eight
- E. three
Answer: B
NEW QUESTION 111
An administrator notices that backups are failing for clients added to a new backup policy. The backups attempt to run again after 10 minutes.
How can the administrator modify the time between backup attempts?
- A. modify the "Schedule backup attempts" host property
- B. modify the "Job retry delay" host property
- C. modify the "Take checkpoints every" value in the backup policy
- D. modify the "Policy update interval" host property
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 112
How is the expiration date of an imported image determined during an import?
- A. By using the import date plus the origin retention
- B. By using the original backup date plus the original retention
- C. By using the original backup date plus infinity
- D. By using the import date plus seven years
Answer: A
Explanation:
Explanation
https://www.veritas.com/content/support/en_US/article.100017201.html
NEW QUESTION 113
An administrator needs to prevent users on all client systems from performing user-directed restores while ensuring they are able to view the contents of all previous backup images.
What should the administrator configure to accomplish this goal?
- A. remove the client from the Restore Failover list in the master server host properties.
- B. modify the auth.conf file on the master server to exclude the line: * ADMIN=JBP JBP=ENDUSER+BU+ARC.
- C. de-select the "Allow client restore" parameter in the master server host properties in client attributes.
- D. de-select the "Allow server file writes" parameter in the master server host properties in client attributes.
Answer: A
NEW QUESTION 114
An administrator has backups for a Linux client that are failing with the following error message:
Status 58: can't connect to client
Which command should the administrator use to identify why the media server is unable to connect to the client?
- A. bpclient
- B. nbemmcmd
- C. bpclntcmd
- D. nbsetconfig
Answer: C
Explanation:
Explanation/Reference: https://www.veritas.com/support/en_US/article.100020482
NEW QUESTION 115
Which command should an administrator run to display all images written to both disk and tape for a particular client?
- A. bpimmedia
- B. bplist
- C. bpstulist
- D. bpimage
Answer: A
NEW QUESTION 116
An administrator has a MS-Windows type policy that has failed for a Microsoft Windows NetBackup client.
The policy uses the ALL_LOCAL_DRIVES backup selection. See the extract from the end of the job details below:
Which two logs will provide the most relevant information for troubleshooting and resolving the error? (Select two.)
- A. Operating system logs on the client
- B. NetBackup bptm logs on the media server
- C. NetBackup bpfis logs on the client
- D. NetBackup bpfis logs on the media server
- E. Operating system logs on the media server
Answer: A,C
NEW QUESTION 117
NetBackup has frozen some of the tapes added to the robot.
Which log must be enabled to determine why the tapes were frozen?
ltid
- A. robots
- B.
- C. bptm
- D. vmd
Answer: B
NEW QUESTION 118
Refer to the Exhibit.
An administrator has created a policy that has three new Full schedules as shown in the exhibit. All the schedules are set to run on Friday, from 0200 to 0600.
What is the order of priority for the schedules on Friday?
- A. Full-Quarterly > Full-Monthly > Full-Weekly
- B. Full-Monthly > Full-Weekly > Full-Quarterly
- C. Full-Weekly > Full-Monthly > Full-Quarterly
- D. Full-Quarterly > Full-Weekly > Full-Monthly
Answer: C
NEW QUESTION 119
A backup job is showing the following error message:
Which two actions can an administrator perform to ensure the backup completes successfully? (Select two.)
- A. Increase the ''Limit I/O stream'' parameter on the disk volume
- B. Assign a specific Storage Unit for that policy
- C. Increase the ''Maximum concurrent jobs'' parameter on the Storage Unit
- D. Increase the Multiplexing value on the Storage Unit
- E. Ensure at least one storage unit is without the On demand only option selected
Answer: B,E
NEW QUESTION 120
Manual backups apply only to automatic schedules.
- A. True
- B. False
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 121
An administrator took media server mediaA offline for maintenance and set up a new media server mediaB with access to the previously backed up data. When restores are performed for data that was backed up by mediaA, the restores fail.
Which setting must the administrator modify to allow successful restores?
- A. from the master server, run bpimage to change the host name of the media server from mediaA to mediaB
- B. in the BAR console, change the "Server to use for backup and restores" setting to mediaB
- C. verify both media servers are set up in the master server host properties in the "Restore Failover" section
- D. set "Enable unrestricted media sharing for all media servers" in the master server host properties in the Media section
Answer: C
NEW QUESTION 122
A volume is no longer used for backups if it is past its expiration data or has reached its maximum number of mounts.
- A. True
- B. False
Answer: A
NEW QUESTION 123
An administrator is creating a Standard policy with the option ''Use Accelerator'' to back up files on a Linux server.
Which two options are disabled by default in this type of policy? (Choose two.)
- A. Encrypt
- B. Collect true image restore information
- C. Allow multiple data streams
- D. Cross mount points
- E. Compress
Answer: A,E
NEW QUESTION 124
The master server catalog is being recovered to a new server. The administrator receives the message displayed below:
In the NetBackup Administration Console, barcode GBP178S4 is associated with media ID P178S4.
How should the administrator proceed?
- A. use bplabelto change the media ID > re-inventory the library > perform recovery
- B. delete the tape > set the media ID generation rule accordingly > re-inventory the library > run recovery
- C. delete the tape > set the barcode rule accordingly > re-inventory the library > run recovery
- D. use nbdelete to remove the media id > use vmaddto re-add the media id > re-inventory the library > perform recovery
Answer: B
NEW QUESTION 125
Refer to the exhibit.
The following Storage Lifecycle Policy was used to back up data from a client. All duplication jobs have completed, and none of the backups have expired.
How should an administrator restore data from the tape using Netbackup?
- A. From the BAR console, start the restore and NetBackup will automatically select the tape copy
- B. From the BAR console, select the tape backup to restore from
- C. From the Netbackup Administrator Console, promote copy 2 to the primary copy
- D. From the Netbackup Administrator Console, promote copy 1 to the primary copy
Answer: C
NEW QUESTION 126
NetBackup commands can be used in UNIX shell or Windows batch scrips to perform reusable custom operations.
- A. True
- B. False
Answer: A
NEW QUESTION 127
From where is the Cleanup Wizard for Instant Recovery launched?
- A. From the vSphere Client for Windows
- B. From the command line on the NetBackup Master Server
- C. From the NetBackup Administration Console
- D. From the NetBackup Plug-in for VMware vSphere Web Client
Answer: D
Explanation:
Explanation
The graphical Instant Recovery and Instant Recovery Cleanup wizards are found in the NetBackup Plug-in for VMware vSphere Web Client.
NEW QUESTION 128
Which command can an administrator run to test and analyze connection between master servers, media servers, and clients for multiple Netbackup ports?
- A. Bpresolver
- B. Bpconfig
- C. Bptestnetconn
- D. Bperror
Answer: C
NEW QUESTION 129
......
Pass Your VCS-278 Exam Easily with Accurate PDF Questions: https://www.examsreviews.com/VCS-278-pass4sure-exam-review.html