[Feb 23, 2026] Pass VCP-VCF Administrator 2V0-11.25 Exam With 164 Questions
Ultimate Guide to Prepare Free VMware 2V0-11.25 Exam Questions and Answer
NEW QUESTION # 71
An administrator is responsible for monitoring the logs of multiple vSphere components using VMware Aria Operations for Logs. They notice an increase in error logs for a specific ESXi host.
Which two steps should be taken to pinpoint the issue? (Choose two.)
- A. Restart the ESXi host to resolve the issue immediately
- B. Check for patterns or repeated error messages over a specific time frame.
- C. Delete all old logs to free up space and generate new logs.
- D. Filter the loos by the ESXi host name and error severity.
- E. Correlate the error logs with recent configuration changes on the ESXi host.
Answer: B,D
Explanation:
Filtering the logs by the ESXi host name and error severity helps narrow down the logs to those relevant to the specific host and allows for easier identification of significant errors.
Checking for patterns or repeated error messages over a specific time frame helps identify the root cause of the issue and determine if the errors are linked to a specific event or condition.
NEW QUESTION # 72
A VMware Cloud Foundation administrator notices that the SDDC Manager dashboard shows an alert indicating that one of the ESXi hosts in their workload domain is in a Not Responding state.
What is the first troubleshooting step that should be performed to resolve this issue?
- A. Upgrade the ESXi host to the latest version.
- B. Remove and re-add the ESXi host to the workload domain.
- C. Reboot the ESXi host from the SDDC Manager interface.
- D. Check the network connectivity between the ESXi host and the SDDC Manager.
Answer: D
Explanation:
When an ESXi host is in a "Not Responding" state in VMware Cloud Foundation, the first step in troubleshooting is to check the network connectivity between the ESXi host and the SDDC Manager. Network issues (e.g., misconfigured VLANs, firewall settings, or network outages) are often the primary cause of communication problems between SDDC Manager and the ESXi host.
NEW QUESTION # 73
An administrator is tasked with enabling Workload Management (vSphere IaaS control plane) on a VMware Cloud Foundation workload domain.
Which three of the following are prerequisites for enabling Workload Management? (Choose three.)
- A. Ensure that the cluster has at least three ESXi hosts.
- B. Configure NTP and DNS settings for all management components.
- C. Verify that all ESXi hosts are running vSphere 7.0 or later.
- D. Install the vSphere Client on all ESXi hosts.
Answer: A,B,C
Explanation:
For Workload Management in VMware Cloud Foundation, a minimum of three ESXi hosts is required to create a robust, highly available vSphere cluster.
Proper NTP and DNS configuration is essential to ensure time synchronization and proper resolution of network names, which are critical for Workload Management.
The hosts must be running vSphere 7.0 or later to be compatible with the latest features and requirements for Workload Management.
NEW QUESTION # 74
While deploying a new VMware Cloud Foundation environment, a cloud administrator validates the information entered into the Deployment Parameter Workbook. The validation action results in an error and the VMware Cloud Builder GUI error message does not identify the cause.
Which logfile can the administrator use to identify the cause of the validation error?
- A. VMware SDDC Manager appliance - vcf-bringup-debug.log
- B. VMware Cloud Builder appliance - vcf-bringup-debug.log
- C. VMware SDDC Manager appliance - vcf-deployment-debug.log
- D. VMware Cloud Builder appliance - vcf-deployment-debug.log
Answer: D
Explanation:
The vcf-deployment-debug.log file on the VMware Cloud Builder appliance contains detailed logs related to the deployment process, including any validation errors. This log will help identify the cause of the error during the deployment validation phase.
NEW QUESTION # 75
Which VMware vSphere feature provides the ability to define and apply datastore capabilities to ensure virtual machines meet specific performance and availability requirements?
- A. Host Profiles
- B. Storage Policies
- C. Storage Policy Components
- D. Performance Service
Answer: B
Explanation:
Storage Policies in VMware vSphere allow administrators to define and apply specific storage requirements for virtual machines, ensuring they meet desired performance and availability standards. These policies enable the alignment of VM storage needs with the capabilities of the underlying datastores.
NEW QUESTION # 76
An administrator needs to ensure that specific virtual machines within a VMware Cloud Foundation environment use storage that can tolerate at least two host failures. As resources are limited, the configuration should use the available resources as efficiently as possible.
Which three steps should be performed to configure a storage policy that meets the requirements? (Choose three.)
- A. Set Failures to Tolerate to "2 failures - RAID-1 (Mirroring)" in the policy configuration.
- B. Apply the storage policy to the target VMs.
- C. Set Failures to Tolerate to "2 failures - RAID-6 (Erasure Coding)" in the policy configuration.
- D. Reconfigure the existing Default Storage Policy in the vSphere Client.
- E. Configure the policy to use thin provisioning.
- F. Create a new VM Storage Policy in the vSphere Client.
Answer: B,C,F
Explanation:
A new VM storage policy needs to be created in the vSphere Client to define specific requirements for the storage configuration, including tolerance for two host failures.
Once the storage policy is created, it must be applied to the specific virtual machines that require the storage configuration that tolerates two host failures.
To ensure the storage configuration tolerates two host failures efficiently, RAID-6 (Erasure Coding) is the appropriate choice. RAID-6 can tolerate two host failures while minimizing resource usage compared to other configurations like RAID-1.
NEW QUESTION # 77
Which feature of VMware Lifecycle Manager allows an administrator to manage the lifecycle of ESXi hosts by applying a consistent image across the hosts in a cluster? (Choose three.)
- A. Enable SSH on the ESXi hosts to manage encryption keys.
- B. Enable the encryption feature on the ESXi hosts.
- C. Create an encryption policy in vCenter.
- D. Apply the encryption policy to the existing VMs.
- E. Configure a Key Management Server (KMS) and add it to vCenter
Answer: C,D,E
Explanation:
A Key Management Server (KMS) is required to manage encryption keys in the environment, ensuring that encrypted data is securely managed across ESXi hosts.
Creating an encryption policy in vCenter allows administrators to define how encryption is applied to virtual machines and data.
Applying the encryption policy to the existing VMs ensures that the encryption settings are enforced on virtual machines that require protection.
NEW QUESTION # 78
An organization is integrating VMware vCenter with Active Directory (AD) to streamline user authentication. As part of this process, the administrator needs to add AD as an identity source in vCenter.
Which three steps must be performed to successfully add AD as an identity source? (Choose three.)
- A. Enter the Domain Name and the credentials of an AD user with domain join privileges
- B. Configure DNS settings on all ESXi hosts to point to the AD DNS servers.
- C. Navigate to the vCenter Single Sign-On configuration in the vSphere Client.
- D. Reboot the vCenter Server to apply the identity source settings.
- E. Select 'Add Identity Source' and choose 'Active Directory (Integrated Windows Authentication)'.
Answer: A,C,E
Explanation:
When adding AD as an identity source, you need to enter the Domain Name and provide the credentials of an AD user with domain join privileges to authenticate and add the domain.
In the vSphere Client, you need to select 'Add Identity Source' and choose the appropriate method for AD integration, which is typically 'Active Directory (Integrated Windows Authentication)'.
The process to add AD as an identity source is performed under the vCenter Single Sign-On (SSO) configuration in the vSphere Client.
NEW QUESTION # 79
An administrator successfully removed a host from a VMware vSphere cluster and decommissioned it in SDDC Manager.
What must be done before the host can be recommissioned and added back to the SDDC Manager inventory?
- A. Reinstall ESXi on the host.
- B. Manually uninstall the NSX VIBs on the host.
- C. From the host console, use the /sbin/qenerate-certifcates command to qenerate a new self-siqned certificate.
- D. Loq in to the host console and select "Reset System Configuration" from the ESXi DCUI.
Answer: D
Explanation:
Before the host can be recommissioned and added back to the SDDC Manager inventory, you must reset the system configuration. This can be done from the ESXi Direct Console User Interface (DCUI) by selecting the
"Reset System Configuration" option. This will remove any previous configuration and allow the host to be re- added to the environment.
NEW QUESTION # 80
An organization is implementing a downtime avoidance solution and wants to ensure continuous availability of applications across separate sites that are connected via a high bandwidth/low latency link.
Which two VMware Cloud Foundation components support this capability with stretched clusters? (Choose two.)
- A. vVOL
- B. vSAN
- C. vSphere Replication
- D. vSphere
- E. NSX Firewall
Answer: B,D
Explanation:
vSAN: vSAN supports stretched clusters, allowing data to be mirrored across multiple sites to ensure continuous availability and enable high availability for virtual machines in case of a site failure.
vSphere: vSphere also supports stretched clusters, enabling the high availability of applications across multiple sites by allowing virtual machines to be run on either site in the event of a failure.
NEW QUESTION # 81
A virtual private cloud administrator is regularly tasked to provision and manage new application workloads with dedicated subnets.
Which two capabilities of VMware Cloud Foundation (VCF) can be used to alleviate the workload of the administrator with minimal interaction with the networking team? (Choose two.)
- A. Configure vSAN storage policies for each application.
- B. Deploy Aria Automation to enable self-service provisioning.
- C. Use vSphere Resource Pools to allocate networking resources to different applications.
- D. Use of NSX overlay networks.
Answer: B,D
Explanation:
Deploying VMware Aria Automation enables self-service blueprints that allow the administrator or application owners to provision workloads, including dedicated networks, without direct requests to the networking team.
NSX overlay networks decouple the virtual network from the physical underlay, enabling the creation of tenant-specific subnets on demand without changes to the physical network.
NEW QUESTION # 82
What is the impact of consolidating snapshots on a virtual machine?
- A. It changes the VM's hardware compatibility settings.
- B. It disconnects the VM from the network temporarily.
- C. It temporarily increases the available disk space consumption on the datastore while merging data.
- D. It reverts the VM to the state of the first snapshot taken.
Answer: C
Explanation:
When consolidating snapshots, the data from the snapshot files is merged back into the original virtual disk.
This process temporarily increases the disk space usage on the datastore because of the additional space required to merge the snapshot data into the primary disk.
NEW QUESTION # 83
A single VM is unable to communicate with other VMs on the same network. An administrator needs to identify and resolve the network connectivity issue.
What three steps should the administrator follow? (Choose three.)
- A. Ensure that the Port Group name(s) associatedwith the VMs network adapterfsexists in the vSwitch or VDS and is spelled correctly
- B. Verity that the virtual network adapter is present and connected.
- C. Use the ESXi command line to check the status of the VM Kernel adapter.
- D. Restart the VM to reset its network connections.
- E. Verify that the networkingwithin the VMs quest OS is correct.
Answer: A,B,E
Explanation:
Ensuring the guest OS network configuration (IP, subnet mask, gateway) is correct rules out misconfiguration within the VM.
Confirming the virtual NIC is present and connected verifies the VM's link to the virtual switch.
Checking that the port group name exists and is correct ensures the VM is attached to the intended network segment.
NEW QUESTION # 84
While preparing to enable Application Virtual Networks (AVNs) and deploying Aria Suite components, an administrator plans to deploy an NSX Edge cluster.
What is a requirement for deploying the NSX Edge cluster?
- A. The Edge transport nodes must be deployed using the 'large' form factor.
- B. The Edge transport nodes must be configured with an MTU of 1500.
- C. The Edge cluster must be configured for NSX Federation.
- D. The Edge cluster must be deployed in the management domain.
Answer: D
Explanation:
When deploying an NSX Edge cluster in a VMware Cloud Foundation (VCF) environment, it must be deployed in the management domain. The management domain is responsible for managing and orchestrating various resources, including the NSX Edge cluster, which is crucial for network virtualization and security within the environment.
NEW QUESTION # 85
During the deployment of a VI workload domain using SDDC Manager, an administrator encounters issues with host configuration.
Which three steps should be followed to troubleshoot and resolve the configuration issues? (Choose three.)
- A. Verify that all ESXi hosts are connected to the management network.
- B. Check the compatibility of the hardware with VMware Cloud Foundation requirements.
- C. Ensure that all ESXi hosts have the correct version of ESXi installed.
- D. Reconfigure the NSX Edge nodes.
- E. Restart the SDDC Manager appliance to reset configurations.
Answer: A,B,C
Explanation:
Verifying hardware compatibility with VMware Cloud Foundation requirements is essential. If the hardware is not compatible, configuration issues can arise during deployment.
Ensuring that the ESXi hosts have the correct version installed is crucial because mismatched versions can lead to configuration failures.
Verifying that all ESXi hosts are connected to the management network is important because connectivity issues between hosts and management components can prevent proper configuration during deployment.
NEW QUESTION # 86
An administrator has been tasked with updating the version of VMware Tools on virtual machines that have been migrated into a VMware Cloud Foundation (VCF) instance so that they are compliant with the company's security policies. The following information is shared with the administrator about this task:
The VMs have been migrated from environments running earlier releases of vSphere.
The VMs are spread across multiple clusters within a single workload domain in the VCF instance.
The upgrade must not initiate a reboot of the VMs to avoid downtime to the business.
Which three steps should the administrator perform in order to complete this task? (Choose three.)
- A. Select the Set Auto Update option and set its value to On.
- B. Use vSphere Lifecycle Manager in the VI workload domain vCenter to initiate the upgrade.
- C. Select the VI workload domain so that all VMs across all clusters are automatically selected.
- D. Use SDDC Manager in the management domain to initiate the upgrade.
- E. Select the Upgrade to Match Host option.
- F. Select the cluster hosting the VMs to upgrade.
Answer: A,B,E
Explanation:
Comprehensive and Detailed Explanation From Exact Extract:
As defined in the VMware Cloud Foundation Administration Guide and vSphere Lifecycle Manager official documentation, the correct way to upgrade VMware Tools at scale across multiple clusters and without initiating a VM reboot is as follows:
B . Use vSphere Lifecycle Manager in the VI workload domain vCenter to initiate the upgrade.
The official guidance is to use vSphere Lifecycle Manager (vLCM) for managing VMware Tools versions across VMs. This tool allows you to select multiple clusters or the entire workload domain and execute VMware Tools upgrades centrally.
D . Select the Upgrade to Match Host option.
The "Upgrade to Match Host" setting in vSphere Lifecycle Manager is specifically designed to align the VMware Tools version in the guest with the version included with the ESXi host, and can be applied without a forced VM reboot. The upgrade will complete the next time VMware Tools starts or during the next guest OS reboot or shutdown initiated by the user or other processes.
F . Select the Set Auto Update option and set its value to On.
The "Auto Update" option for VMware Tools, when set to On, allows VMware Tools to automatically update to the latest version whenever the VM is powered on or rebooted, without requiring the administrator to intervene or force a downtime event.
Why Not the Other Options?
A . Selecting the VI workload domain alone does not guarantee a compliant upgrade process; the upgrade must be triggered via Lifecycle Manager with the proper options set.
C . Selecting a single cluster would not meet the requirement for VMs spread across multiple clusters.
E . SDDC Manager does not manage or trigger VMware Tools upgrades at the VM level.
Summary:
To upgrade VMware Tools on all relevant VMs in a VCF workload domain, and to do so without forced reboots, the administrator should:
Use vSphere Lifecycle Manager in the VI workload domain vCenter (B),
Select the Upgrade to Match Host option (D),
And enable Auto Update for VMware Tools (F).
This method is fully supported by official VMware best practices and documentation.
NEW QUESTION # 87
An administrator's passwords for their NSX 'root', 'admin', and 'audit' accounts in the Cloud Foundation management domain expired. The administrator logged into the NSX Manager console and changed the passwords for all three accounts. The passwords are now showing a status of "Disconnected" in the SDDC Manager UI.
- A. In order to correct this issue, how can SDDC Manager be updated with the new passwords?
- B. In SDDC Manager, navigate to Password Management and select the account with the password with a
"Disconnected" status, click the vertical ellipsis (three dots), and click Sync. - C. In SDDC Manager, navigate to Password Management and select the account with the password with a
"Disconnected" status, click the vertical ellipsis (three dots), and click Remediate. - D. In SDDC Manager, navigate to Password Management and select the account with the password with a
"Disconnected" status, click the vertical ellipsis (three dots), and click Rotate.
Answer: D
Explanation:
To resolve the issue of disconnected accounts in SDDC Manager after password changes, the administrator must navigate to the Password Management section in the SDDC Manager UI. From there, the administrator can select the affected account, click the vertical ellipsis (three dots), and choose Update to enter the new password for that account, ensuring SDDC Manager is synced with the correct credentials.
NEW QUESTION # 88
To help troubleshoot an issue with the vSphere Supervisor, an administrator must log into the Supervisor Control Plane VMs.
Which three actions should the administrator take to meet the objective? (Choose three.)
- A. Obtain the <password> by running /usr/lib/vmware-wcp/decryptK8Pwd.py.
- B. Log into the SDDC Manager appliance using SSH.
- C. Log into the Supervisor Control Plane VM using the root user and <password>.
- D. Log into the vCenter Server Appliance using SSH.
- E. Update the <password> by running /usr/lib/vmware/auth/bin/chpw admin.
- F. Log into the Supervisor Control Plane VM using the admin user and <password>.
Answer: A,B,D
Explanation:
https://knowledge.broadcom.com/external/article/323407/troubleshooting-vsphere-with-tanzu-tkgs.html First SSH into vCenter and run /usr/lib/vmware-wcp/decryptK8Pwd.py
NEW QUESTION # 89
An organization has 3 data center sites and is implementing a solution to achieve a Recovery Point Objective (RPO) of 0 to ensure continuous availability of storage in the event of a single site failure. The sites are connected via a high bandwidth/low latency link.
Which two VMware Cloud Foundation (VCF) components can be used to support this capability? (Choose two.)
- A. NSX
- B. vSAN
- C. vSphere Replication
- D. vSphere
- E. Aria Operations
Answer: B,D
Explanation:
To achieve an RPO of 0 across three sites in VMware Cloud Foundation you would implement a vSAN Stretched Cluster (for synchronous, zero-RPO storage replication) and use NSX (to provide the under-the- hood, cross-site L2/L3 networking fabric that carries the vSAN traffic and keeps the cluster coherent).
VCF Storage (vSAN)
Implements stretched clusters with synchronous replication, delivering continuous availability with ~0 RPO and low RTO across sites.
VCF Networking (NSX)
Provides the cross-site overlay networking required to carry vSAN's replication traffic and maintain a unified cluster across geographically dispersed sites.
NEW QUESTION # 90
An administrator is tasked with deploying a new VMware Cloud Foundation (VCF) instance. The management domain is designed to be created with three virtual distributed switches (VDS) configured as follows:
VDS1 - used for management and vMotion traffic
VDS2 - used for vSAN traffic
VDS3 - used for NSX Overlay traffic
What action would the administrator take to deploy the designed configuration?
- A. A JSON file must be prepared with the defined configuration and used to run the bring-up process.
- B. The ESXi hosts have to be configured with twelve physical NICs to ensure redundancy.
- C. The design must be changed to ensure vSAN and NSX overlay traffic are on the same VDS.
- D. vSphere Distributed Switch Profile 2 must be selected in the VCF Deployment parameter workbook.
Answer: A
NEW QUESTION # 91
An administrator needs to ensure that their VMware Cloud Foundation-based private cloud solution can support multi-tenancy for different departments within their organization.
What two configurations and components are necessary to achieve this? (Choose two.)
- A. Use vSphere Resource Pools to allocate resources to different departments.
- B. Deploy Aria Automation to enable self-service provisioning for tenants.
- C. Configure vSAN storage policies for each department.
- D. Use NSX to create isolated network segments for each tenant.
Answer: A,D
Explanation:
vSphere Resource Pools allow for the allocation of CPU, memory, and storage resources to different departments (tenants) within the VMware Cloud Foundation environment. This ensures that each department has its own dedicated resources, preventing resource contention between them.
NSX can be used to create isolated network segments (logical networks) for each tenant, ensuring network security and segmentation between departments. Each department can have its own isolated network environment.
NEW QUESTION # 92
Which is the appropriate first action to take to resolve dropped network packets on an ESXi host?
- A. Migrate VMs to another data store
- B. Increase the CPU and memory allocation for VMs
- C. Check physical network switch configuration
- D. Enable Storage I/O Control
Answer: C
Explanation:
Dropped network packets are often caused by misconfigurations or issues at the physical network layer. Checking the physical network switch configuration is the first step to ensure that the network settings, such as VLANs, uplinks, and port configurations, are correctly set up. This ensures proper connectivity and traffic flow for the ESXi host and the VMs.
NEW QUESTION # 93
An administrator needs to create a custom role in vCenter Server that is part of VMware Cloud Foundation environment to grant specific privileges to a group of users.
Which two actions should be taken to create this custom role? (Choose two.)
- A. Choose the privileges required for the custom role.
- B. Apply the custom role to the root of the vCenter Server inventor/.
- C. Clone an existing role in SDDC Manager to create the custom role.
- D. Navigate to the Roles section in the vSphere Client.
- E. Assign permissions to the custom role before adding privileges.
Answer: A,D
Explanation:
When creating a custom role, it is essential to choose the appropriate privileges that the role will require.
These privileges define what actions the users in the role can perform.
To create and manage roles, you need to navigate to the "Roles" section in the vSphere Client. This is where roles are defined and assigned within the vCenter Server.
NEW QUESTION # 94
DRAG DROP
Put the following steps in the correct order to update the driver/firmware in vSAN.
Answer:
Explanation:
NEW QUESTION # 95
......
VMware Cloud Foundation 5.2 Administrator Practice Tests 2026 | Pass 2V0-11.25 with confidence!: https://drive.google.com/open?id=1s2SkdcZ7OFwXub1pfeJjD7nieQtd2IWk
Pass 2V0-11.25 Tests Engine pdf - All Free Dumps: https://www.examsreviews.com/2V0-11.25-pass4sure-exam-review.html