Full NSE5_FMG-6.2 Practice Test and 85 unique questions with explanations waiting just for you!
Fortinet NSE 5 Dumps NSE5_FMG-6.2 Exam for Full Questions - Exam Study Guide
NEW QUESTION 44
Refer to the exhibit.
An administrator has configured the command shown in the exhibit on FortiManager. A configuration change has been installed from FortiManager to the managed FortiGate that causes the FGFM tunnel to go down for more than 15 minutes.
What is the purpose of this command?
- A. It allows FortiGate to reboot and recover the previous configuration from its configuration file.
- B. It allows FortiGate to unset central management settings.
- C. It allows FortiGate to reboot and restore a previously working firmware image.
- D. It allows the FortiManager to revert and install a previous configuration revision on the managed FortiGate.
Answer: A
Explanation:
Explanation/Reference:
Reference: https://docs.fortinet.com/document/fortimanager/6.2.0/fortigate-fortimanager-communications- protocol-guide/141304/fgfm-recovery-logic
NEW QUESTION 45
You are moving managed FortiGate devices from one ADOM to a new ADOM.
Which statement correctly describes the expected result?
- A. The shared policy package will not be moved to the new ADOM
- B. Any pending device settings will be installed automatically
- C. Any unused objects from a previous ADOM are moved to the new ADOM automatically
- D. Policy packages will be imported into the new ADOM automaticallyD
Answer: D
NEW QUESTION 46
View the following exhibit:
Which of the following statements are true if the scripts is executed using Remote FortiGate Directly (via CLI) option? (Choose two.)
- A. FortiManager will create a new revision history.
- B. You must install these changes using Install Wizard
- C. FortiManager provides a preview of CLI commands before executing this script on a managed FortiGate.
- D. FortiGate will auto-update the FortiManager's device-level database.
Answer: A,D
NEW QUESTION 47
Which two statements regarding device management on FortiManager are true? (Choose two.)
- A. FortiGate in transparent mode configurations are not counted toward the device count on FortiManager.
- B. The maximum number of managed devices for each ADOM is 500.
- C. FortiGate devices in HA cluster devices are counted as a single device.
- D. FortiGate devices in an HA cluster that has five VDOMs are counted as five separate devices.
Answer: C,D
NEW QUESTION 48
An administrator with the Super_Userprofile is unable to log in to FortiManager because of an authentication failure message.
Which troubleshooting step should you take to resolve the issue?
- A. Make sure the administrator IP address is part of the trusted hosts
- B. Make sure ADOMs are enabled and the administrator has access to the Global ADOM
- C. Make sure FortiManager Access is enabled in the administrator profile
- D. Make sure Offline Mode is disabled
Answer: A
Explanation:
Explanation
NEW QUESTION 49
An administrator would like to create an SD-WAN using central management. What steps does the administrator need to perform to create an SD-WAN using central management?
- A. Enable SD-WAN central management in the ADOM, add member interfaces, create a static route and SDWAN firewall policies.
- B. You must specify a gateway address when you create a default static route
- C. Remove all the interface references such as routes or policies
- D. First create an SD-WAN firewall policy, add member interfaces to the SD-WAN template and create a static route
Answer: A
NEW QUESTION 50
Refer to the exhibit.
Which two statements about the output are true? (Choose two.)
- A. Configuration changes have been installed on FortiGate, which means the FortiGate configuration has been changed.
- B. The latest revision history for the managed FortiGate does not match with the device-level database.
- C. Configuration changes directly made on FortiGate have been automatically updated to the device-level database.
- D. The latest revision history for the managed FortiGate does match with the FortiGate running configuration.
Answer: B,D
NEW QUESTION 51
In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?
- A. FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.
- B. Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device.
- C. Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device.
- D. Secondary device with highest priority will automatically be promoted to the primary role, and manually reconfigure all other secondary devices to point to the new primary device
Answer: B
NEW QUESTION 52
View the following exhibit.
Which statement is true regarding this failed installation log?
- A. Policy ID 2 is installed without a source address
- B. Policy ID 2 will not be installed
- C. Policy ID 2 is installed without a source device
- D. Policy ID 2 is installed in disabled state
Answer: C
NEW QUESTION 53
An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.
Which troubleshooting step should you take to resolve the issue?
- A. Make sure ADOMs are enabled and the administrator has access to the Global ADOM
- B. Make sure FortiManager Access is enabled in the administrator profile
- C. Make sure Offline Mode is disabled
- D. Make sure the administrator IP address is part of the trusted hosts.
Answer: D
NEW QUESTION 54
Refer to the exhibits.
Exhibit one.
Exhibit two.
An administrator created a new system template named Training with two new DNS addresses on FortiManager. During the installation preview stage, the administrator notices that many unset commands need to be pushed.
What can be the main reason for these unset commands?
- A. The DNS addresses in the default system settings are the same as the Training system template
- B. The ADOM is locked by another administrator
- C. The Training system template does not have assigned devices
- D. The Training system template has other default settings
Answer: D
NEW QUESTION 55
Which ports are commonly used by FortiManager? (Choose two.)
- A. TCP 514 for remote management of a FortiGate unit.
- B. TCP 703 HA heartbeat or synchronization (FortiManager HA cluster).
- C. TCP 541 for remote management of a FortiGate unit.
- D. TCP 5199 HA heartbeat or synchronization (FortiManager HA cluster).
Answer: A,B
NEW QUESTION 56
View the following exhibit. An administrator has created a firewall address object, Training, which is used in the Local-FortiGate policy package.
When the install operation is performed, which IP Netmask will be installed on the Local-FortiGate, for the Training firewall address object?
- A. It will create firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values
- B. Local-FortiGate will automatically choose an IP Network based on its network interface settings.
- C. 192.168.0.1/24
- D. 10.0.1.0/24
Answer: D
Explanation:
In the example, the dynamic address object LocalLan refers to the internal network address of the managed firewalls. The object has a default value of
192.168.1.0/24. The mapping rules are defined per device. For Remote-FortiGate, the address object LocalLan referes to 10.10.11.0/24. The devices in the ADOM that do not have dynamic mapping for LocalLan have a default value of 192.168.1.0/24.
NEW QUESTION 57
Refer to the exhibit.
An administrator logs into the FortiManager GUI and sees the panes shown in the exhibit.
Which two reasons can explain why the FortiAnalyzer feature panes do not appear? (Choose two.)
- A. FortiAnalyzer features are not enabled on FortiManager.
- B. The administrator logged in using the unsecure protocol HTTP, so the view is restricted.
- C. The administrator IP address is not a part of the trusted hosts configured on FortiManager interfaces.
- D. The administrator profile does not have full access privileges like the Super_User profile.
Answer: A,C
NEW QUESTION 58
An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?
- A. Allows FortiManager to download IPS packages
- B. Allows FortiManager to automatically configure a default route
- C. Allows FortiManager to run real-time debugs on the managed devices
- D. Allows FortiManager to respond to request for FortiGuard services from FortiGate devices
Answer: D
NEW QUESTION 59
Which two statements are correct for configuration changes made by FortiManager scripts? (Choose two)
- A. When run on the device database, changes are automatically installed to the managed FortiGate devices.
- B. When run on managed devices directly, changes are automatically installed to the managed FortiGate devices.
- C. When run on the device database, you can install changes to the managed FortiGate devices using the installation wizard.
- D. When run on managed devices directly, you can install changes to the managed FortiGate devices using the installation wizard.
Answer: B,C
Explanation:
A script can make many changes to a managed device and are useful for bulk configuration changes and consistency across multiple managed devices. Scripts can be run in three different ways:
Device Database: By default, a script can be executed on the device database. It is recommended you run the changes on the device database (default setting), as this allows you to check what configuration changes you will send to the managed device. Once scripts are run on the device database you can then install these changes to a managed device using the installation wizard.
Policy Package, ADOM database: A script can be run here to create ADOM level objects that will be applied to your managed devices and can then be installed using the installation wizard.
Remote FortiGate Directly (via CLI): A script can be executed directly on the device and you don't need to install these changes using the installation wizard. As the changes are directly installed on the managed device, no option is provided to verify and check the configuration changes through FortiManager.
NEW QUESTION 60
When installation is performed from the FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?
- A. FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.
- B. FortiManager will revert and install a previous configuration revision on the managed FortiGate.
- C. FortiGate will reject the CLI commands that will cause the tunnel to go down.
- D. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.
Answer: D
NEW QUESTION 61
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom ADOM1.
Which statement about the global policy package assignment to the newly-created policy package Fortinet is true?
- A. When a new policy package is created, you can select the option to assign the global policies to the new package.
- B. When a new policy package is created, you need to reapply the global policy package to the ADOM.
- C. When a new policy package is created, you need to assign the global policy package from the global ADOM.
- D. When a new policy package is created, it automatically assigns the global policies to the new package.
Answer: D
NEW QUESTION 62
An administrator is replacing a device on FortiManager by running the following command:
execute device replace sn <devname> <serialnum>.
What device name and serial number must the administrator use?
- A. Device name of the original device and serial number of the replacement device.
- B. Device name and serial number of the replacement device.
- C. Device name and serial number of the original device.
- D. Device name of the replacement device and serial number of the original device.
Answer: A
NEW QUESTION 63
View the following exhibit.
Based on the configuration setting, which one of the following statements is true?
- A. The setting enables the ADOMs feature on FortiManager
- B. This setting allows you to assign different VDOMs from the same FortiGate to different ADOMs.
- C. The setting allows automatic updates to the policy package configuration for a managed device
- D. The setting disables concurrent ADOM access and adds ADOM locking
Answer: B
NEW QUESTION 64
Which of the following are FortiManager features? (Choose two)
- A. Centralized Management
- B. Administrative Domains
- C. Virtual Domains
- D. Cloud-based Management
Answer: A,B
Explanation:
Explanation
NEW QUESTION 65
View the following exhibit, which shows the Download Import Report:
Why it is failing to import firewall policy ID 2?
- A. Policy ID 2 does not have ADOM Interface mapping configured on FortiManager
- B. Policy ID 2 for this managed FortiGate already exists on FortiManager in policy package named Remote-FortiGate.
- C. The address object used in policy ID 2 already exist in ADON database with any as interface association and conflicts with address object interface association locally on the FortiGate
- D. Policy ID 2 is configured from interface any to port6 FortiManager rejects to import this policy because any interface does not exist on FortiManager
Answer: C
NEW QUESTION 66
......
Authentic Best resources for NSE5_FMG-6.2 Online Practice Exam: https://www.examsreviews.com/NSE5_FMG-6.2-pass4sure-exam-review.html