Get Latest [Jan-2024] Conduct effective penetration tests using ExamsReviews NS0-162
Penetration testers simulate NS0-162 exam PDF
NEW QUESTION # 39
A node fails on an HA configuration. A successful failover occurs, but your clients that are using the SMB protocol complain that they are not able to access their data.
In this scenario, what caused the problem?
- A. The surviving node is not licensed for CIFS.
- B. The disk ownership did not transfer correctly.
- C. One of the cluster Interconnect ports on the surviving node failed.
- D. The quota for the qtree has been reached.
Answer: A
NEW QUESTION # 40
Exhibit.
A Linux host with the 10.0.1.24 IP address is unable to mount the VOL_A volume using NFSv3.
Referring to the exhibit, what is the problem?
- A. The host IP address does not match the export policy rule.
- B. The volume is not mounted In the namespace.
- C. The volume is in read-only.
- D. The logical Interface does not allow the NFSv3 protocol.
Answer: A
NEW QUESTION # 41
Auditing has been enabled and configured on your ONTAP storage system. You have also created audit policies to monitor files and folders. Auditing has been running for over six months. You want to ensure that there have been no improper file access attempts.
How would you accomplish this task?
- A. Use Microsoft System Center to read EVTX files.
- B. Import EVTX files into Microsoft SQL.
- C. Use the Active IQ Web site to read EVTX files.
- D. Import EVTX files Into Microsoft Event Viewer.
Answer: C
NEW QUESTION # 42
You ate attempting to establish a SnapMlrror relationship between your ONTAP cluster (AcmeClusOl) and a partner company's ONTAP cluster (WidgetsClusOl). The clusters are unable to establish a peering relationship. You perform a packet capture on WldgetsClusOl and do not see any packets from AcmeClusOl. You also discover that the IP subnet that Is used for WidgetsClusOl's intercluster LIFs overlaps with a local subnet at your company.
In this scenario, which feature would enable AcmeClusOl and WidgetsClusOl to peer with each other?
- A. broadcast domains
- B. IPspaces
- C. VLANs
- D. ONTAP subnets
Answer: B
Explanation:
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Protection_and_Security/SnapMirror/How_to_create_and_configure_Cluster_Peering_with_designated_InterCluster_LIFs_using_IPSpaces
NEW QUESTION # 43
The source NAS volume of a SnapMirror relationship is unavailable due to networking issues at your organization's primary data center. You want to make the destination NAS volume writable so that clients are able to access their data.
Which two steps do you need to take to solve the issue? (Choose two.)
- A. Break the SnapMirror relationship using the snapairrcr break command from the destination cluster.
- B. Break the SnapMirror relationship using the snapmirror break command from the source cluster.
- C. Use the volume mount command to mount the NAS volume In the NFS namespace.
- D. Delete the SnapMirror relationship from the destination cluster.
Answer: A,C
NEW QUESTION # 44
Click the Exhibit button.
You are configuring a NetApp cluster to communicate on VLAN 1. However, the new LIF is unable to communicate with any host in the VLAN. The network administrator has configured the switch port as an access(untagged) port on VLAN 1 and says that the VLAN is non-routed.
Referring to the exhibit, what would you do to troubleshoot this problem?
- A. Verify that there is no IP address conflict on the network.
- B. Reconfigure the LIF to be on port e0c.
- C. Add a default gateway.
- D. Verify that the network cabling is working properly.
Answer: B
NEW QUESTION # 45
Exhibit.
A user cannot save a file on an ONTAP SMB share.
Referring to the exhibit, which action allows the user to save the file?
- A. Synchronize the ONTAP Cluster time to the Active Directory time.
- B. Set the user permission for the share to write.
- C. Let the user save the file to a writeable location.
- D. Allow the file type, file In the CIFS Server policy.
Answer: C
NEW QUESTION # 46
SnapMirror Business Continuity (SM-BC) relies on a component to trigger an automatic unplanned failover (AUFO). In this scenario, what is this component?
- A. ONTAP Mediator
- B. Cloud Manager
- C. Tiebreaker software
- D. ONTAP Deploy
Answer: A
NEW QUESTION # 47
You are the administrator of an ONTAP 9.8 cluster. Your company wants to know how many files are In the NAS volumes of the cluster and how old these files are.
Which two tools fulfill this requirement? (Choose two.)
- A. Active IQ Unified Manager
- B. Active IQ Config Advisor
- C. ONTAP CLI
- D. ONTAP System Manager
Answer: C,D
NEW QUESTION # 48
Exhibit.
You have a 2-node NetApp FAS2750 ONTAP cluster. You create a new 20-GB LUN In a new 100-GB volume and write 10 GB of data to the LUN. No storage efficiencies are enabled for the volume or aggregate.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. ONTAP reports that the volume Is using 10 GB of Its containing aggregate.
- B. ONTAP reports that the volume Is using 100 GB of its containing aggregate.
- C. ONTAP reports the volume as 10% full.
- D. ONTAP reports the volume as 20% full.
Answer: B,D
NEW QUESTION # 49
Exhibit.
After an ONTAP upgrade, you notice that several cluster LIFs are not on their home ports as shown in the exhibit.
Which LIF option would change this outcome?
- A. the data-protocol option
- B. the failover-policy option
- C. the subnet-name option
- D. the auto-revert option
Answer: D
Explanation:
https://docs.netapp.com/us-en/ontap/networking/revert_a_lif_to_its_home_port.html
NEW QUESTION # 50
Which two SVM types does a cluster contain after cluster creation? (Choose two.)
- A. dp-destination
- B. peer
- C. data
- D. admin
Answer: C,D
NEW QUESTION # 51
You are an administrator that manages a number of mission-critical applications that use block protocols only. The business unit requires the fastest storage failover.
In this scenario, which ONTAP solution satisfies the requirement?
- A. ONTAP Select with Asymmetric Logical Unit Access (ALUA)
- B. AFF with Asymmetric Logical Unit Access (ALUA)
- C. All SAN Array (ASA) with symmetric active-active topology
- D. FAS with symmetric active-active topology
Answer: C
NEW QUESTION # 52
Click the Exhibit button.
You are the administrator of your company's ONTAP 9.7 storage system. You try to connect your vSphere hosts to a newly created NFS datastore and receive the error message shown in the exhibit.
What must you do to solve this problem?
- A. Set the MTU size for the data LIF to 9000.
- B. Activate all NFS protocol versions in your SVM.
- C. Add the vSphere host's IP addresses to an export policy rule.
- D. Change the volume security style to UNIX.
Answer: D
NEW QUESTION # 53
Click the Exhibit button.
Referring to the exhibit, what are two reasons why no initiators are displayed in the initiators' igroup screen? (Choose two.)
- A. Zoning on the switches has been done incorrectly.
- B. SLM has not been enabled.
- C. The server has not been powered up.
- D. ALUA has not been enabled on the NetApp controllers.
Answer: A,C
NEW QUESTION # 54
Click the Exhibit button.
You have a 2-node cluster cabled as shown in the exhibit. You want to convert the cluster to a switched cluster.
Which two statements are true in this scenario? (Choose two.)
- A. The conversion is disruptive.
- B. After the conversion, traffic to the cluster LIFs will flow through the cluster switch.
- C. The conversion is non-disruptive.
- D. After the conversion, traffic to the intercluster LIFs will flow through the cluster switch.
Answer: B,C
NEW QUESTION # 55
You are configuring an ONTAP cluster to use NV Me/FC.
In this scenario, which two statements are true? (Choose two.)
- A. Create NV Me LIFs on FC target ports.
- B. Create and start the FC service.
- C. Create an SVM with both NV Me and FC protocols enabled.
- D. Create an SVM with NV Me enabled.
Answer: A,D
NEW QUESTION # 56
A user wants existing data in a FlexVol created in ONTAP 9.1 to be placed into a FlexGroup volume with ONTAP 9.8. In this scenario, which two statements are true? (Choose two.)
- A. Use SnapMirror to replicate data from FlexVol to FlexGroup.
- B. Use XCP to copy data from a FlexVol to a FlexGroup.
- C. A FlexVol to FlexGroup conversion is not supported.
- D. You can convert the FlexVol volume to a FlexGroup volume.
Answer: B,C
NEW QUESTION # 57
You have commissioned a new AFF A250 MetroCluster over IP configuration. Your company requires an automatic switchover to the surviving site In case of a site disaster.
What do you need to configure to fulfill this requirement?
- A. automated unplanned switchover
- B. storage failover
- C. ONTAP Mediator service
- D. cluster failover
Answer: C
NEW QUESTION # 58
Click the Exhibit button.
Your manager asks you to create a new FlexVol on an aggregate called AGGR_2. When you click "Create new FlexVol," you are unable to select AGGR_ 2 to create the new volume.
Referring to the exhibit, which two SVM settings solve this problem? (Choose two.)
- A. In the resource allocation tab, select the "Delegate volume creation" option and select AGGR_2.
- B. Use the volume move option and reallocate the SVMs root volume to AGGR_2.
- C. Change the aggregate security style of AGGR_2 to UNIX.
- D. In the resource allocation tab, select the "Do not delegate volume creation" option.
Answer: A,D
NEW QUESTION # 59
You need to Increase the number of files that can be created In a volume. Which two methods enable you to achieve this goal? (Choose two.)
- A. Increase the number of files permitted on the volume.
- B. Set the space guarantee to 'volume".
- C. Set the fractional reserve to "0".
- D. Increase the size of the volume.
Answer: A,D
NEW QUESTION # 60
Exhibit
After creating a new LIF called datalif1 on SVM vs0, you notice connectivity issues to the newly created LIF, as shown In the exhibit. You have verified that the new LIF Is online and the network team is able to see the MAC address on the switches.
Referring to the exhibit, what would cause connectivity Issues?
- A. The home port needs to be modified to port e0d.
- B. The route metric needs to be modified to a metric of 30.
- C. The netmask needs to be modified to a /16 network.
- D. The route needs to be modified to reflect the correct gateway.
Answer: D
NEW QUESTION # 61
Which two components are required for committing data to a WORM volume? (Choose two.)
- A. You must license SnapLock.
- B. You must create a SnapLock SVM.
- C. You must create a SnapLock Aggregate.
- D. You must create a SnapLock volume.
Answer: A,D
NEW QUESTION # 62
......
Tested Material Used To NS0-162 Test Engine: https://www.examsreviews.com/NS0-162-pass4sure-exam-review.html
Steps Necessary To Pass The NS0-162 Exam: https://drive.google.com/open?id=1lIBCIHIDeyip_6L4l7VFsQYtsnh0JqVH