Pay attention to our Valid and Useful Exam Reviews and take our Exam Torrent as your Study Material. With little time and energy investment, you have a High Efficiency Study experience. Pass your Actual Test with the help of our Actual Reviews.

Get New 2021 Cisco 300-435 Exam Dumps Bundle On flat Updated Dumps! [Q58-Q76]

Share

Get New 2021 Cisco exam 300-435 Dumps Bundle On flat Updated Dumps!

Full 300-435 Practice Test and 110 unique questions with explanations waiting just for you, get it now!

NEW QUESTION 58
Drag and drop the characteristics from the left onto the network types on the right.

Answer:

Explanation:

 

NEW QUESTION 59
What are two characteristics of RPC API calls? (Choose two.)

  • A. They can be used only on network devices.
  • B. They use only UDP for communications.
  • C. They call a single function or service.
  • D. They must use SSL/TLS.
  • E. Parameters can be passed to the calls.

Answer: A,E

 

NEW QUESTION 60

Refer to the exhibit. Which two parameters are mandatory when the Cisco Meraki API is used to create a network? (Choose two.)

  • A. disableMyMerakiCom
  • B. type
  • C. tags
  • D. timezone
  • E. organizationId

Answer: D,E

Explanation:
Section: Cisco Meraki
Explanation:
Without organizationID and timezone, you will not be able to create a network. Organizationid is necessary for the connection. Timezone is necessary for the network id.

 

NEW QUESTION 61
When the Cisco DNA center intent API is used as part of an automation process what prompts receiving a HTTP 206 status code on a call?

  • A. The client made a request that has been received but not yet acted upon.
  • B. The client authentication credentials that are included with the request are missing or invalid.
  • C. The client request was successful, but there is no content associated with the request.
  • D. The client made a request for partial content matching a range header.

Answer: D

 

NEW QUESTION 62
Information about a rebooted device needs to be displayed with an ID of 260faff9-2d31-4312-cf96-
143b46db0211 using the Cisco SD-WAN vManage Administration APIs. The API documentation states that deviceId is a required request parameter. Fill in the blank to create the REST call.

Answer:

Explanation:
?deviceId=

 

NEW QUESTION 63

Refer to the exhibit. A RESTCONF GET request is sent to a Cisco IOS XE device. The base URL of the request and the response in XML format are shown in the exhibit. What is the YANG data node that is referenced in the response?

  • A. route is a leaf list
  • B. static-routes is a container
  • C. static-routes is a list
  • D. routing-instance is a container

Answer: A

Explanation:
Section: Network Device Programmability
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/ b_166_programmability_cg/restconf_prog_int.pdf

 

NEW QUESTION 64
Fill in the blanks to complete this API request against the Cisco SD_WAN vManage Statistics API, which specified a deviceId of 260faff9-2d31-4312-cf96-143b46db0211, a local-color of biz-internet, and a remote- color of gold.

Answer:

Explanation:
deviceID=, local-color, remote-color

 

NEW QUESTION 65
An engineer stored source code in a Git repository and is ready to develop a new feature. The production release is stored in the "master" branch. Which command create the new feature in a separate branch called "feature" and check out the new version?

  • A. Option D
  • B. Option C
  • C. Option A
  • D. Option B

Answer: B

 

NEW QUESTION 66
A Cisco DNA Center script must be written to retrieve a list of interfaces on a switch. Drag and drop the API calls that are needed to return the list of interfaces using the Command Running APIs from the left into the correct sequence on the right.

Answer:

Explanation:

 

NEW QUESTION 67

Refer to the exhibit. What is the result when running the Python scripts?

  • A. s3
  • B. s1, s2, s3
  • C. s1
  • D. s2

Answer: D

Explanation:
Section: Network Programmability Foundation
Explanation:

 

NEW QUESTION 68
Refer to the exhibit. Which device type is functioning in a degraded state?

  • A. access point
  • B. wireless LAN controller
  • C. access switch
  • D. distribution switch

Answer: B

 

NEW QUESTION 69
Which two features are foundations of a software-defined network instead of a traditional network? (Choose two.)

  • A. control plane and data plane are tightly coupled
  • B. requires device by device-level configurations
  • C. automated through expressed intent to a software controller
  • D. build upon a robust software stack
  • E. requires significant physical hardware resources

Answer: C,D

Explanation:
In traditional networks, control plane and data plane are coupled tightly. It also requires device by device configurations and of course, it uses physical hardware resources to function. Whereas, SDN is based on a software stack. In Cisco SDNs are automated through expressed intent to a software controller.

 

NEW QUESTION 70


Refer to the exhibits. An engineer creates a Python scripts using ncclient to display interface information. The code must be completed so that it can be tested. Which expression completes the highlighted section in the format call?

  • A. intf_info
  • B. intf_config
  • C. intf_config[0]
  • D. intf_get

Answer: A

Explanation:
Section: Network Device Programmability
Explanation
Explanation:
The highlighted format cell for print is for the host.
Reference: https://github.com/CiscoDevNet/dnac-python-path-trace/blob/master/path_trace.py

 

NEW QUESTION 71
What are two benefits of leveraging Ansible for automation of Cisco IOS XE Software? (Choose two.)

  • A. Ansible playbooks can be written from the IOS XE EXEC command line to configure the device itself.
  • B. Ansible playbooks are packaged and installed on IOS XE devices for automatic execution when an IOS device reboots.
  • C. All IOS XE operating systems include Ansible playbooks for basic system administration tasks.
  • D. It does not require any modules of software except SSH to be loaded on the network device.
  • E. It is a device-independent method for automation and can be used with any type of device or operating system.

Answer: B,E

 

NEW QUESTION 72
Which statement describe the difference between OpenConfig and native YANG data models?

  • A. OpenConfig models are developed by vendors and designed to integrate to features or configurations that are relevant only to that platform.
  • B. Native models are developed by vendors and designed to integrate to features or configurations that are relevant only to that platform.
  • C. Native models are developed by individual developers and designed to apply configurations on platforms.
  • D. Native models are designed to be independent of the underlying platform and are developed by vendors and standards bodies, such as the IETF.

Answer: D

 

NEW QUESTION 73
Refer to the exhibit.

A Python script must be created to deactivate vSmart Policy Cisco SD-WAN vManage Configuration APIs.
The documentation states the URL is as shown in the exhibit for this REST call using POST, and that
"policyId" is a required request parameter. Which line of Python code makes this call, assuming the variable
"s" is a valid Requests session object and the variable "policy-id" is the policyId?

  • A. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate/%s' % policy_id)
  • B. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate?policyId=%s' % policy_id)
  • C. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate/', data = {'policyId':
    policy_id})
  • D. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate&policyId=%s' % policy_id)

Answer: A

 

NEW QUESTION 74
Which HTTP request is valid to create a new wireless network called "Demo Wireless Network" in the organization "QASD-EROA-MKAW"?

  • A. Option A
  • B. Option D
  • C. Option B
  • D. Option C

Answer: A

 

NEW QUESTION 75
Which statement is true for Cisco IOS XE Software?

  • A. RESTCONF supports XML and NETCONF supports JSON and XML.
  • B. RESTCONF supports XML and NETCONF supports JSON.
  • C. RESTCONF supports JSON and XML and NETCONF supports XML.
  • D. RESTCONF and NETCONF supports JSON and XML.

Answer: C

Explanation:
Section: Automate APIs and Protocols
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/169/ b_169_programmability_cg/restconf_programmable_interface.html

 

NEW QUESTION 76
......

[Sep-2021] Pass Cisco 300-435 Exam in First Attempt Guaranteed: https://drive.google.com/open?id=1b0eWff41uWM5rXX4Iwy9fYx_nr-pCb2a

Reduce Your Chance of Failure in 300-435 Exam: https://www.examsreviews.com/300-435-pass4sure-exam-review.html