[May-2023] The HP HPE2-T37 Exam Test For Brief Preparation
Revolutionary Guide To Exam HP Dumps
What are the prerequisites for taking the HPE2-T37 Exam?
Evidently, the HPE2-T37 exam is not available to candidates who have not completed their Bachelor's degree or equivalent. The qualification of the candidates who wish to take the HPE2-T37 exam is also a must. HPE2-T37 Dumps will provide you with the right guidance. In addition, It is also important for the candidates to have some prior experience in the areas of information technology. For example, they must have at least two years of experience in designing and configuring the HPE OneView Management Suite (HPE1VM) and at least two years of experience in deploying an HPE environment. The candidate should also be familiar with the HPE Hybrid IT product portfolio.
NEW QUESTION 47
You have created volumes using array management tools and imported the volumes to HPE OneView.
Which statement about these volumes is true?
- A. Volumes imported to HPE OneView cannot be removed using the HPE OneView interface
- B. Volumes imported to HPE OneView is managed just like a volume created using HPE OneView
- C. Imported volumes are treated as private volumes and can be only used as boot volumes
- D. A snapshot for imported volumes can be created only by using array management tools
Answer: C
NEW QUESTION 48
Click option that will allow you to select a FlexNIC function for the specified connection.
Answer:
Explanation:
NEW QUESTION 49
You try to add an HPE Primera array to HPE OneView, but you get a connectivity error. However, you can connect to the array using SSMC. What should you verify before adding HPE Primera to HPE OneView?
- A. whether array management using HPE OneView is enabled in SSMC.
- B. whether WSAPI service is enabled on HPE Primera array.
- C. whether there are at least two Fibre Channel networks defined in HPE OneView.
- D. whether the appropriate license for HPE Primera Is available in HPE OneView.
Answer: B
NEW QUESTION 50
Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.
Answer:
Explanation:
NEW QUESTION 51
As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.
Answer:
Explanation:
NEW QUESTION 52
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks are not added to the Logical Interconnect Group configuration.
- B. The other networks are not configured with the required Smart Link parameter.
- C. The other networks have Private Network' selected, which hides them from Compute Modules.
- D. The other networks are configured with a purpose other than General or Management.
Answer: C
NEW QUESTION 53
Which action is allowed on storage pools managed by HPE OneView?
- A. Setting storage pool replication
- B. Volume provisioning
- C. Changing storage pool capacity
- D. Changing storage pool RAID level
Answer: B
NEW QUESTION 54
You want to put two FlexNlCs into a single Link Aggregation Group within a server profile. What Is a prerequisite for this setup?
- A. The Compute Module profile must have exactly two connections defined.
- B. Both FlexNlCs must be connected to the same network.
- C. An upgrade license must be purchased and deployed.
- D. The sFlow option must be enabled and configured.
Answer: B
NEW QUESTION 55
You want a server profile to be automatically applied when an HPE Synergy Compute Module is replaced.
Click the appropriate configuration option.
Answer:
Explanation:
NEW QUESTION 56
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
- B. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
- C. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
- D. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
Answer: B
NEW QUESTION 57
You configured downlink aggregation for one of the HPE Synergy Compute Modules in an environment by placing two connections in the same Link Aggregation Group. After you made the changes to the server profile, its status changed to critical.
What can be done to fix this issue?
- A. The teaming or bonding driver in the server OS must be configured to enable the LACP and to form the LAG correctly.
- B. The server profile for a given HPE Synergy compute module should be reapplied, then the Compute Module should be rebooted.
- C. Ensure that the Link Aggregation Group time-out value matches the server set values.
- D. Link Aggregation Group functionality should be enabled in advanced properties of the Logical Interconnect.
Answer: D
NEW QUESTION 58
Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems. What should you explain to this customer?
- A. HPE Management Agent must he installed for HPE ProLiant Gen 10 servers.
- B. Not all of the features will be available for HPE ProLiant G7 systems.
- C. HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.
- D. HPE ProLiant Gen 10 servers do not need an HPE OneView license.
Answer: D
NEW QUESTION 59
Refer to the exhibit.
You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?
- A. Changes to the server profile were implemented directly on the server profile.
- B. The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.
- C. Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.
- D. HPE OneView was restored from a backup that created inconsistency with the server profile template.
Answer: A
NEW QUESTION 60
Which HPE components can be managed using HPE Composer? (select two.)
- A. HPE MSA 2062 Storage Array
- B. HPE Synergy 480 Compute Modules
- C. HPE B-series SN6600B Fibre Channel Switch
- D. HPE Superdome Flex 280
- E. HPE Synergy Virtual Connect SE 32Gb FC Module
Answer: C,E
NEW QUESTION 61
You try to add a new connection within a server profile, but an operation fails when you try to commit the changes.
What is a possible reason?
- A. The server does not have an HPE OneView license applied
- B. You tried to add additional connection above the limit
- C. The server is powered off
- D. The server is powered on
Answer: D
NEW QUESTION 62
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
- B. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
- C. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
- D. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
Answer: B
Explanation:
HPE Synergy 4-port Frame Link Modules have SFP+ ports which enable connections to distant frames and remote subnets.
NEW QUESTION 63
Which statement about a server profile for an Apollo system is true?
- A. Enclosure Group Is automatically selected
- B. Fibre Channel connections can be defined
- C. Virtual WWNs and MAC addresses can be defined
- D. UEFI optimized is the only available boot mode
Answer: C
NEW QUESTION 64
Your customer wants to use HPE OneView for VMware vCenter Server to simplify management of their VMware cluster running on HPE Synergy. The customer is concerned with the cost of additional licenses.
How will you explain licensing rules for this product?
- A. As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.
- B. As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.
- C. One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than 10 Compute Modules are installed in the frame.
- D. If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.
Answer: C
NEW QUESTION 65
Which statement about server hardware types is true?
- A. The server hardware type is automatically created when a server with unique architecture and mezzanine card configuration is added to HPE OneView
- B. Server hardware type can be defined only for HPE Synergy and HPE BladeSystem, but it cannot be defined for HPE ProLiant or Apollo systems
- C. Administrator has to manually define the server hardware type for any unique server architecture and mezzanine card combination
- D. Once selected in the server profile, the server hardware type cannot be changed, and a server profile can be moved only between the same type of servers
Answer: D
NEW QUESTION 66
Which parameters can be defined in a server profile template for HPE Synergy Compute Modules? (Select two.)
- A. IL0 IPv4 or IPv6 address.
- B. local storage and BIOS settings.
- C. partition layout for servers running Linux.
- D. NIC teaming setup at OS level.
- E. network and storage connectivity.
Answer: B,E
NEW QUESTION 67
How will setting the Purpose field within the network definition of a server profile impact the network traffic?
- A. network purpose will define QoS within Logical Interconnect
- B. network purpose does not affect the behavior of the network
- C. network purpose can give higher priority for a specific type of traffic
- D. network purpose will impact the traffic only if Virtual Connect modules are used
Answer: A
NEW QUESTION 68
For HPE Primera, match each task with the management tool that can be used to perform it.
Answer:
Explanation:
NEW QUESTION 69
Refer to the exhibit.
A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?
- A. The firmware repository is not defined within firmware compliance report.
- B. The refresh procedure must be performed on each logical enclosure to refresh firmware.
- C. All of the components are up to date and compliant with firmware baseline.
- D. The firmware repository service must be restarted using maintenance connection.
Answer: D
NEW QUESTION 70
Refer to the exhibit.
Which statement about server connections is true?
- A. Ethernet connection is configured to boot from PXE
- B. All connections within the server profile are using physical IDs
- C. Storage array is connected directly to an HPE Synergy frame
- D. LACP on downlinks is configured for Ethernet connection
Answer: A
NEW QUESTION 71
Click the option that will allow you to update the firmware of master and satellite modules.
Answer:
Explanation:
NEW QUESTION 72
......
HPE2-T37 Free Study Guide! with New Questions: https://www.examsreviews.com/HPE2-T37-pass4sure-exam-review.html
Pass HPE2-T37 Exam Latest Practice Questions: https://drive.google.com/open?id=1RDuMbLukBNUM-htDn5fjH3MFVdUjIZ9W