Practice on 2023 LATEST OSP-002 Exam Updated 170 Questions
Download Latest OSP-002 Dumps with Authentic Real Exam QA's
The OSP-002 exam is a comprehensive test that includes both multiple-choice and scenario-based questions. OSP-002 exam is designed to assess the candidate's ability to understand and apply industry standards and best practices in OSP design. Successful candidates will demonstrate their knowledge of OSP design principles, local codes and regulations, and the latest trends and technologies in the field.
NEW QUESTION # 88
(Choose all correct answers)
What optical fiber types are recognized in the structured cabling standards?
- A. Singlemode in backbones
- B. Multimode in backbones
- C. Multimode in horizontal connections
- D. Singlemode in horizontal connections
Answer: A,B,C
NEW QUESTION # 89
What minimum level of UTP cable type is required by 1000Base-T (Gigabit Ethernet)
- A. Cat 6
- B. Cat 5
- C. Augmented Cat 6
- D. Cat 5e
Answer: D
NEW QUESTION # 90
Which of the following fiber specifications is most important to the user and is an important factor in testing?
- A. Numerical aperture
- B. Core-cladding concentricity
- C. Bandwidth
- D. Attenuation
Answer: D
NEW QUESTION # 91
To maintain rated performance, twists in each pair must be maintained to within \_\_\_\_\_\_\_ of the termination.
- A. 25 mm
- B. 1 inch
- C. 1/2 inch
- D. 2.5 cm
Answer: C
NEW QUESTION # 92
The loss of a singlemode fiber is lowest at \_\_\_\_\_\_\_\_\_\_.
- A. 1310 nm
- B. 850 nm
- C. 1300 nm
- D. 1550 nm
Answer: D
NEW QUESTION # 93
You can keep track of how much cable is left in a box if you ___________.
- A. You can't
- B. Read the distance off the cable
- C. Record on the cable box the beginning distance marked on the cable
- D. Weigh the box
Answer: C
NEW QUESTION # 94
Before beginning a wireless installation, it is most important that you ________.
- A. Carefully estimate costs
- B. Make sure the vendors, products work together
- C. Do a thorough site survey
- D. Decide which vendors to use
Answer: C
NEW QUESTION # 95
What other cables are recognized in the structured cabling standards?
- A. IBM Type II
- B. CATV RG-6 coax
- C. Multimode fiber optic cable
- D. Singlemode and multimode fiber optic cable
Answer: D
NEW QUESTION # 96
Which punchdown block is more often used with data (Cat 5e/6)?
- A. Bix block
- B. Krone block
- C. 110 block
- D. 66 block
Answer: C
NEW QUESTION # 97
The common IEEE 802.11b wireless LAN is also called
- A. WiMax
- B. WiFi
- C. Hot Spot
- D. Bluetooth
Answer: B
NEW QUESTION # 98
A wireless antenna is also known as a \_\_\_\_\_\_\_\_\_\_.
- A. Wireless router
- B. WC (wireless cell)
- C. Hot spot
- D. Access point
Answer: D
NEW QUESTION # 99
For a cable tray installed within an ER, the RECOMMENDED access headroom is:
- A. 254 mm (10 in).
- B. 203 mm (8 in).
- C. 152 mm (6 in).
- D. 305 mm (12 in).
Answer: D
NEW QUESTION # 100
Which reference method is required for TIA 568?
- A. Three cable reference
- B. Two cable reference
- C. Any method as long as it is documented
- D. One cable reference
Answer: C
NEW QUESTION # 101
Which punchdown block is more often used with POTS telephone connections?
- A. Bix block
- B. 110 block
- C. Krone block
- D. 66 block
Answer: D
NEW QUESTION # 102
The diameter of an optical fiber is traditionally measured in \_\_\_\_\_\_\_\_\_\_.
- A. Millimeters
- B. Microns (micrometers)
- C. Nanometers
- D. Meters
Answer: B
NEW QUESTION # 103
Why is the structured cabling standard not like "code"?
- A. It doesn't deal with flammability
- B. It is not written by the NFPA
- C. It changes every year
- D. It's voluntary, not required by law
Answer: D
NEW QUESTION # 104
Copper networks can be converted to fiber optics using \_\_\_\_\_\_\_\_\_\_.
- A. Rewiring
- B. Fiber hubs
- C. Patch panels
- D. Media converters
Answer: D
NEW QUESTION # 105
Why are punchdown blocks used with Cat 3 and Cat 5 cabling?
- A. Terminate cables from equipment
- B. Meet EIA/TIA 568 Standards
- C. Change from T568A to T568B terminations
- D. Interconnect cables in a telecom closet
Answer: D
NEW QUESTION # 106
A category-rated UTP cable (Cat 3/5e/6/6A) used for horizontal cabling has \_\_\_\_\_\_ color coded pairs of wires.
- A. Any even number
- B. 0
- C. 1
- D. 2
Answer: C
NEW QUESTION # 107
An older fiber design with a 50/125 micron core is now being used in cabling systems because it___________.
- A. Excess supplies are currently available from the far east
- B. Can be cabled in more compact cable designs
- C. Costs half as much as other multimode fibers
- D. Has a higher bandwidth with laser sources which gives more distance capability with gigabit (and above) networks
Answer: D
NEW QUESTION # 108
What is the international standard for structured cabling?
- A. ISO-9000
- B. TIA-568
- C. ISO-11801
- D. IEC-0001
Answer: C
NEW QUESTION # 109
If you use a Cat 3 UTP jack on newer Cat 5e cable plant, the link performance will meet \_\_\_\_\_\_specs.
- A. Cat 6
- B. Cat 5E
- C. Cat 5
- D. Cat 3
Answer: D
NEW QUESTION # 110
......
Authentic OSP-002 Exam Dumps PDF - Dec-2023 Updated: https://www.examsreviews.com/OSP-002-pass4sure-exam-review.html
OSP-002 Dumps Special Discount for limited time Try FOR FREE: https://drive.google.com/open?id=1bwcglDfLjPrgv3s2S0Kz6W6q_gp1h9Wp