Unique Top-selling HPE2-N68 Exams - New 2021 HP Pratice Exam
HPE Product Certified - Containers Dumps HPE2-N68 Exam for Full Questions - Exam Study Guide
NEW QUESTION 14
Refer to the exhibit.
What should you keep (n mind as you configure the circled setting?
- A. You must increase the size of these subnets by changing them to use a /24 prefix length.
- B. You must make sure that the two subnets overlap so that pods can communicate with services.
- C. You must check with network admins and make sure that they have set up routes to these subnets in the data.
- D. You can select any large subnets; these addresses are tunneled with VXLAN and invisible outside the cluster.
Answer: A
NEW QUESTION 15
What is one requirement tor setting up Platform High Availability (HA)?
- A. The controller and the shadow controller must be on different subnets.
- B. Gateway HA must be configured before you enable Platform HA.
- C. The controller and the gateway must be on the same subnet.
- D. Any virtual clusters that have been created on EPIC workers must be deleted.
Answer: A
NEW QUESTION 16
What is one benefit that HPE Ezmeral Container Platform provides for loT deployments?
- A. It supports Edgeline servers, which are specialized for the edge, as hosts within the platform.
- B. Its control plane runs in the HPE cloud, which brings the scalability required for lot
- C. It supports importing third-party loT platforms as clusters managed by the platform.
- D. It provides APIs for deploying the platform services on mobile devices.
Answer: D
NEW QUESTION 17
A company wants to use Ezmeral Data Fabric to provide storage to Kubernetes Tenants on HPE Ezmeral Container Platform. What deployment option should you choose?
- A. Disable the embedded Data Fabric during the controller install. Create a dedicated Data Fabric Kubernetes cluster.
- B. Enable the embedded Data Fabric during the controller install. Create hybrid Kubernetes clusters that use Data Fabric and non-Data Fabric nodes.
- C. Enable the embedded Data Fabric during the controller install. Also create a dedicated Data Fabric Kubernetes cluster.
- D. Disable the embedded Data Fabric during the controller install. Create hybrid Kubernetes clusters that use Data Fabric and non-Data Fabric nodes.
Answer: C
NEW QUESTION 18
Refer to the exhibit.
You are logged in as a Tenant Admin named "admin 1." You have uploaded a file into the location shown In the exhibit. Now you want to apply that tile from the Web Terminal. How do you obtain access to the file in the Web Terminal?
- A. Set up a Data Tap between the Web Terminal and the TenantShare/apps directory.
- B. Set up a Source Control that references both the Web Terminal and the TenantShare.
- C. Access the file in the Web Terminal's "/bd-fs-mnt/TenantShare/apps" directory.
- D. Copy the file to the Web Terminal using the scp@admin 1 :/TenantShare/apps/ command within the terminal.
Answer: A
NEW QUESTION 19
A customer needs an Ezmeral Container Platform solution for supporting a mix of statef ul and stateless applications. The customer also wants the platform to nost Ezmeral Data Fabric on Kubernetes.
Which systems are recommended for the Data Fabric workers?
- A. Apollo 4200s
- B. SimpliVity 380s
- C. Synergy 380s
- D. Apollo 6500s
Answer: D
NEW QUESTION 20
What Is the purpose of the training stage in the ML lifecycle?
- A. The ML application applies a model to the data and tests the effectiveness of that model.
- B. The ML algorithm assesses different datasets and selects the best data for use in later stages.
- C. The ML application gathers data and applies an algorithm to prepare the data for use.
- D. The ML algorithm processes a dataset and learns to perform a task.
Answer: C
NEW QUESTION 21
You have created a Data Fabric-type Kubernetes cluster on Ezmeral Container Platform. You want to use this cluster's Data Fabric to provide persistent storage for other Kubernetes clusters on the platform.
This storage should include automatically generated TenantShares and TenantStorages.
What should you do?
- A. Use scripts on the controller to prepare, configure, and register the Data Fabric cluster as the Tenant Storage.
- B. Reference the Data Fabric cluster as the underlying cluster for every Kubernetes Tenant that you create.
- C. Set the platform's Tenant Storage to HDFS mode; specify the IP address of the Data Fabric cluster's conductor (master) in the HDFS settings.
- D. Re-run the Ezmeral Container Platform installation file, selecting the "--upgrade" option, and select the embedded Data Fabric option.
Answer: C
NEW QUESTION 22
What is one way that HPE Ezmeral ML Ops can help companies overcome their AI/ML challenges?
- A. It enforces isolation between notebook environments and training environments.
- B. It provides acceleration for machine learning algorithms to eliminate the need for CPUs.
- C. It provides notebook and training environments with many AI/ML libraries and frameworks.
- D. It provides a custom HPE Ezmeral library for deep learning and neural network algorithms.
Answer: B
NEW QUESTION 23
You have used Ezmeral Container Platform to create a Kubernetes cluster, which has 3 conductor (master) nodes tor HA and 12 workers. Which correctly describes how the platform manages this cluster?
- A. The controller can manage the cluster, but using HA for the conductors limits a few features such as Data Taps and the Web Terminal.
- B. The controller places the conductor nodes in standby mode and takes over as the active conductor for the Kubernetes cluster.
- C. The controller elects one conductor as the primary conductor and places the other conductors in standby mode.
- D. The controller sends API requests through the gateway, which load balances them across the conductor nodes.
Answer: C
NEW QUESTION 24
You want to set up high availability (HA) for the HPE Ezmeral Container Platform control plane. This includes HA for gateways and HA for the platform. You are not planning to use the embedded Ezmeral Data Fabric.
Which hosts will you require at minimum?
- A. Three hosts with 500 GB for OS storage Two hosts with 500 GB for OS storage and 500 GB for ephemeral storage
- B. Three hosts with 500 GB for ephemeral storage and 500 GB for OS storage Two hosts with 500 GB for OS storage
- C. Four hosts with 500 GB for OS storage and 500 GB storage for ephemeral storage
- D. Two hosts with 500 GB for ephemeral storage and 500 GB for OS storage Two hosts with 500 GB for OS storage
Answer: C
NEW QUESTION 25
You want to create a custom dashboard with monitoring information collected by HPE Ezmerat Container Platform. What step should you complete first?
- A. Access each host managed by the platform and export logs in the "var/log/bluedata" directory.
- B. Exec into the epic-nagios pod on the controller and start the Nagios service.
- C. Exec Into the epic-monitoring pod on the controller and enable Kibana.
- D. Create a user account and assign that account the "monitoring" role.
Answer: B
NEW QUESTION 26
What ate the network requirements for the HPE Ezmeral Container Platform controller and gateway?
- A. The controller and gateway must be on the same non-routable private network as each other and all other hosts.
- B. The controller and gateway must be on the same routable network as the Kubernetes or EPIC hosts.
- C. The controller and gateway must be on routable networks, but do not have to be on the same network as each other or other hosts.
- D. The controller and gateway must be on the same routable network as each other, but not necessarily other hosts.
Answer: A
NEW QUESTION 27
You are creating an EPIC Tenant on Ezmeral Container Platform.
When would you grant the Cluster Superuser privilege to Tenant Admins?
- A. The Tenant Admins need rights to multiple tenants, and you do not want to give these users Site Admin rights.
- B. The Tenant Admins need additional rights to set up persistent storage for certain applications.
- C. The Tenant Admins need to access the App Store and download apps for the tenant.
- D. The Tenant Admins requires root access to run ActionScripts on virtual clusters.
Answer: C
NEW QUESTION 28
You have an Ezmeral Container Platform solution running v5.2 software. The platform manages several Kubernetes clusters. You need to upgrade the software. What type of behavior should you expect during the upgrade?
- A. Existing services continue to run with minimal disruption, but users cannot add new services in the Web Ul.
- B. All services on the cluster will be down for about an hour, as will the Web Ul.
- C. Users can access EPIC features, but services running on the Kubernetes cluster will be unavailable.
- D. Users can access the Web Ul. But external clients will not be able to reach services on the cluster.
Answer: C
NEW QUESTION 29
How does HPE Ezmeral Container Platform regulate the use of GPUs on EPIC hosts?
- A. It lets Tenant Admins create flavors, which specify the number of GPUs required by a virtual node using that flavor.
- B. It allows Site Admins to reserve a certain number of GPUs for the tenant within an EPIC tenant's settings.
- C. It creates virtual GPUs and allocates these virtual GPUs to the virtual nodes that request them.
Answer: A
NEW QUESTION 30
......
Best way to practice test for HP HPE2-N68: https://www.examsreviews.com/HPE2-N68-pass4sure-exam-review.html