Updated Nov-2021 Test Engine to Practice NS0-592 Test Questions
NS0-592 Real Exam Questions Test Engine Dumps Training With 67 Questions
NetApp NS0-592 Exam Certification Details:
| Exam Code | NS0-592 NCSE ONTAP |
| Exam Registration | PEARSON VUE |
| Duration | 120 minutes |
| Sample Questions | NetApp NS0-592 Sample Questions |
| Recommended Training | ONTAP Troubleshooting (ILT) |
| Exam Price | $150 USD |
| Number of Questions | 60 |
| Exam Name | Support Engineer ONTAP Specialist |
| Passing Score | 62% |
Network Appliance NS0-592 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 28
A customer calls you about a performance issue that they experienced over the past few days. They want to know if data collection and root cause analysis (RCA) is possible for this issue. This issue appears to be a one time event.
Which tool would be used to satisfy the customer's request?
- A. OneCollect
- B. perfstat
- C. Performance Archive
- D. perfmon
Answer: A
NEW QUESTION 29
A customer reports that a takeover has been disabled on an HA pair.
What would be a cause for this to happen?
- A. The HA interconnect is not functioning properly.
- B. The cluster network is not functioning properly.
- C. The interface for the hardware assist has become unavailable.
- D. There is a disk running too hot.
Answer: A
NEW QUESTION 30
Click the exhibit button.
You have just cabled a new shelf to a FAS8200. Running the system node run -node * sysconfig - a command indicates that multipath HA is configured. However, after running Config Advisor, you receive an error that your cabling is incorrect.
As indicated in the exhibit, which two actions will correct the cabling? (Choose two.)
- A. Move the 0b SAS connection on the bottom controller to 0d on the bottom controller.
- B. Move the 0b SAS connection on the top controller to 0d on the top controller.
- C. Move the 0b SAS connection on the top controller to 0d on the bottom controller.
- D. Move the 0b SAS connection on the bottom controller to 0d on the top controller.
Answer: A,B
NEW QUESTION 31
You want to determine which SMB versions that a CIFS server can use when communicating with external servers.
Which two CIFS server settings should be reviewed to accomplish this task? (Choose two.)
- A. smb1-enabled
- B. smb2-enabled-for-dc-conections
- C. smb2-enabled
- D. smb1-enabled-for-dc-connections
Answer: A,B
NEW QUESTION 32
A non-maskable interrupt event occurs. The system panics and then reboots.
In this scenario, what would have caused the panic?
- A. a secd process
- B. a watchdog timer
- C. a volume location distributed database
- D. an ICMP blackhole detector
Answer: B
NEW QUESTION 33
End users are complaining of high latency when accessing an ONTAP 9 luster.
Which command helps you to determine whether there is a storage component that is contributing to this problem?
- A. qos statistics performance show
- B. wafltop show -v -cpu -I 10 -c 5-n 6
- C. sysstat -c 30 -M 1
- D. qos statistics latency show
Answer: A
NEW QUESTION 34
After you replaced the motherboard, the node stopped in the "waiting for the cluster application to come online" state.
Which two actions should you perform to troubleshoot this problem? (Choose two.)
- A. Verify the setting of the cluster interconnect switch.
- B. Verify that the physical links on the cluster ports are up.
- C. Check the status of the cluster with the cluster ring show command.
- D. Check the status of the HA with the interconnect-up field of storage failover show command.
Answer: C,D
NEW QUESTION 35
A customer complains that the copy offload does not work when copying large file from a Windows 8 client between the CIFS shares that are hosted on the same ONTAP cluster.
What are two reasons for this problem? (Choose two.)
- A. The client should be using Windows 10 for ODX support.
- B. SMB 3.0 disabled on the CIFS SVM.
- C. The source and target volumes reside on different cluster nodes.
- D. Deduplication is not enabled on the destination volume.
Answer: B,D
NEW QUESTION 36
A customer performs a takeover and giveback of their controllers and notices that several of their NFS clients lose access to their volumes for a short period of time during the SFO process. The customer reviewed the LIF failover policies, and the polices are correct.
What is the reason for this behavior?
- A. NFSv4 file locks need to be broken manually before initiating an SFO operation.
- B. The export policies are incorrect and must be updated with node's HA partner LIF information.
- C. The clients are using NFSv4 to access the volumes.
- D. A firewall is blocking the necessary network ports and needs to be updated to allow NFS communication.
Answer: C
NEW QUESTION 37
A customer mentions that their intercluster SnapMirror replication operations consistently take much longer than normal. While troubleshooting, you want to initiate a test SnapMirror session to collect performance data.
How would you accomplish this task?
- A. Use the ifstat command to collect network performance data for the physical interface.
- B. Run the network test-path command to simulate a SnapMirror connection and record the latency/throughput data.
- C. Run the network statistics lif show command for the intercluster LIF to simulate a network connection.
- D. View the active network connections to the node to see if there a large number of active connections.
Answer: B
NEW QUESTION 38
Click the exhibit button.
When you log in to a node, a warning is displayed as shown in the exhibit.
Which statement is correct in this scenario?
- A. The partner still hosts the CFO aggregate for the node.
- B. The node cannot communicate with the rest of the nodes in the cluster.
- C. The node root volume was moved to a new aggregate.
- D. One or more RDB db files are damaged due to an internal software error.
Answer: B
NEW QUESTION 39
You have a 2-node ONTAP Select HA deployment. In this scenario, which application manages the quorum, if one node fails?
- A. vCenter Server
- B. ONTAP Deploy VM
- C. ONTAP Mediator
- D. Tiebreaker
Answer: B
NEW QUESTION 40
Click the exhibit button.
Your customer added a new DS4246 shelf to their FAS system. They created an aggregate on the new shelf.
Two weeks later, they log in to Active IQ and discover the Medium Impact error shown below.
"Both SAS connections from one controller go to the same shelf."
Referring to the exhibit, which statement is correct?
- A. A faulty cable is causing the problem.
- B. A faulty IOM is causing the problem.
- C. You are unable to obtain a "Cable Visualization" overview from Active IQ.
- D. You can correct this problem without downtime on the FAS system.
Answer: D
NEW QUESTION 41
In a 4-node MetroCluster cluster, both clusters are alerting that the connection to an ATTO bridge is lost.
Which three components should be verified to determine what is causing this problem? (Choose three.)
- A. the dark fiber cables between sites
- B. the ATTO bridge
- C. the fiber cable that is connecting the ATTO bridge to the switch
- D. the SFPs in the storage controllers
- E. the SFPs that are connecting the ATTO bridge to the switch
Answer: B,C,E
NEW QUESTION 42
Click the exhibit button.
The storage administrator for the company example.com is attempting to join an SVM to their Active Directory as SVM1. The computer account must also be joined to the Secure organizational unit. Attempts to perform this action using the CLI fail with the error message shown in the exhibit.
What is the reason for this error?
- A. The requested OU Secure has incorrect principal and errored with
KRB5KDC_ERR_S_PRINCIPAL_UNKNOWN. - B. The requested OU Secure does not exist in the Active Directory and must be created by the Active Directory administrator.
- C. The syntax is incorrect; it should be vserver cifs create -cifs-server svm1 -domain example.com -ou ou=Secure, dc=example, dc=com.
- D. The administrator account password used in vserver cifs create was not entered correctly.
Answer: A
NEW QUESTION 43
Click the exhibit button.
You execute a few commands and many fail, as shown in the exhibit.
What could cause the error?
- A. The aggregates were manually brought offline.
- B. The bcomd user space process on cluster1-02 failed.
- C. The cluster-02 node is down.
- D. The mgwd user space process on cluster1-02 failed.
Answer: C
NEW QUESTION 44
......
NS0-592 Actual Questions Answers PDF 100% Cover Real Exam Questions: https://www.examsreviews.com/NS0-592-pass4sure-exam-review.html