200-301 Dumps Updated Nov 09, 2021 Practice Test and 216 unique questions
2021 Latest 100% Exam Passing Ratio - 200-301 Dumps PDF
More about This Online Course
Let’s start with the basics - course prerequisites. Well, it turns out the CCNA training has much more to it than just qualifying you for new roles. Hence, Cisco advises that all learners looking to validate their skills using this path must first fulfill the requirements listed below:
- Basic knowledge of internet usage;
- Fundamental skills in IP address.
- Have basic computer skills;
- Core skills in PC operating systems and navigating;
NEW QUESTION 121
Drag drop the descriptions from the left onto the correct configuration-management technologies on the right.
Answer:
Explanation:
Explanation
The focus of Ansible is to be streamlined and fast, and to require no node agent installation.
Thus, Ansible performs all functions over SSH. Ansible is built on Python, in contrast to the Ruby foundation of Puppet and Chef.
TCP port 10002 is the command port. It may be configured in the Chef Push Jobs configuration file .
This port allows Chef Push Jobs clients to communicate with the Chef Push Jobs server.
Puppet is an open-source configuration management solution, which is built with Ruby and offers custom Domain Specific Language (DSL) and Embedded Ruby (ERB) templates to create custom Puppet language files, offering a declarative-paradigm programming approach.
A Puppet piece of code is called a manifest, and is a file with .pp extension.
NEW QUESTION 122
Refer to the Exhibit.
After the switch configuration the ping test fails between PC A and PC B Based on the output for switch 1.
which error must be corrected?
- A. Access mode is configured on the switch ports.
- B. The PCs are m the incorrect VLAN
- C. There is a native VLAN mismatch
- D. All VLANs are not enabled on the trunk
Answer: C
Explanation:
Explanation
From the output we see the native VLAN of Switch1 on Gi0/1 interface is VLAN 1 while that of Switch2 is VLAN 99 so there would be a native VLAN mismatch.
NEW QUESTION 123
Refer to the exhibit.
What does router R1 use as its OSPF router-ID?
- A. 10.10.10.20
- B. 192.168.0.1
- C. 172.16.15.10
- D. 10.10.1.10
Answer: C
Explanation:
Explanation
OSPF uses the following criteria to select the router ID:1. Manual configuration of the router ID (via the
"router-id x.x.x.x" command under OSPF router configuration mode).2. Highest IP address on a loopback interface.3. Highest IP address on a non-loopback and active (no shutdown) interface.
NEW QUESTION 124
Refer to the exhibit.
An engineer is configuring the router to provide static NAT for the webserver Drag and drop the configuration commands from the left onto the letters that correspond to its position in the configuration on the right.
Answer:
Explanation:
NEW QUESTION 125
Refer to the exhibit.
Which two commands were used to create port channel 10? (Choose two )
- A. Option A
- B. Option E
- C. Option B
- D. Option C
- E. Option D
Answer: A,D
NEW QUESTION 126
What mechanism carries multicast traffic between remote sites and supports encryption?
- A. GRE
- B. iPsec over ISATAP
- C. GRE over iPsec
- D. ISATAP
Answer: C
NEW QUESTION 127
Drag and drop the SNMP components from the left onto the descriptions on the right.
Answer:
Explanation:
NEW QUESTION 128
Refer to the exhibit.
which path is used by the router for internet traffic ?
- A. 0.0.0.0/0
- B. 10.10.13.0/24
- C. 10.10.10.0/28
- D. 209.165.200.0/27
Answer: A
NEW QUESTION 129
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 130
Refer to the exhibit.
What is the effect of this configuration?
- A. Dynamic ARP inspection is disabled because the ARP ACL is missing
- B. The switch port remains administratively down until the interface is connected to another switch
- C. The switch port remains down until it is configured to trust or untrust incoming packets
- D. The switch port interface trust state becomes untrusted
Answer: D
Explanation:
Explanation
Dynamic ARP inspection (DAI) is a security feature that validates ARP packets in a network. It intercepts, logs, and discards ARP packets with invalid IP-to-MAC address bindings. This capability protects the network from certain man-in-the-middle attacks. After enabling DAI, all ports become untrusted ports.
NEW QUESTION 131
Refer to the exhibit.
The network shown in the diagram is experiencing connectivity problems.
Which of the following will correct the problems? (Choose two.)
- A. Configure the gateway on Host A as 10.1.1.1.
- B. Configure the masks on both hosts to be 255.255.255.240.
- C. Configure the gateway on Host B as 10.1.2.254.
- D. Configure the IP address of Host B as 10.1.2.2.
- E. Configure the IP address of Host A as 10.1.2.2.
- F. Configure the masks on both hosts to be 255.255.255.224.
Answer: C,D
NEW QUESTION 132
Which command on a port enters the forwarding state immediately when a PC is connected to it?
- A. switch(config-if)#no spanning-tree portfast
- B. switch(config)#spanning-tree portfast bpduguard default
- C. switch(config)#spanning-tree portfast default
- D. switch(config-if)#spanning-tree portfast trunk
Answer: D
NEW QUESTION 133
A network engineer is configuring an OSPFv2 neighbor adjacency Drag and drop the parameters from the left onto their required categories on the right. Not all parameters are used
Answer:
Explanation:
NEW QUESTION 134
An engineer must configure a /30 subnet between two routes. Which usable IP address and subnet mask combination meets this criteria?
- A. interface e0/0
description to HQ-A370:98968
ip address 10.2.1.3 255.255.255.252 - B. interface e0/0
description to HQ-A370:98968
ip address 172.16.1.4 255.255.255.248 - C. interface e0/0
description to HQ-A370:98968
ip address 209.165.201.2 225.255.255.252 - D. interface e0/0
description to HQ-A370:98968
ip address 192.168.1.1 255.255.255.248
Answer: C
Explanation:
Section: Network Fundamentals
NEW QUESTION 135
Which configuration management mechanism uses TCP port 22 by default when communicating with managed nodes?
- A. Python
- B. Ansible
- C. Chef
- D. Puppet
Answer: B
NEW QUESTION 136
Two routers named Atlanta and Brevard are connected via their serial interfaces as illustrated, but they are unable to communicate. The Atlanta router is known to have the correct configuration.
Given the partial configurations, identify the fault on the Brevard router that is causing the lack of connectivity.
- A. incorrect subnet mask
- B. IPCP closed
- C. incompatible encapsulation
- D. insufficient bandwidth
- E. incompatible IP address
- F. link reliability too low
Answer: C
NEW QUESTION 137
A network engineer must back up 20 network router configurations globally within a customer environment.
Which protocol allows the engineer to perform this function using the Cisco IOS MIB?
- A. SNMP
- B. SMTP
- C. CDP
- D. ARP
Answer: A
Explanation:
SNMP is an application-layer protocol that provides a message format for communication between SNMP managers and agents. SNMP provides a standardized framework and a common language used for the monitoring and management of devices in a network.
The SNMP framework has three parts:
+ An SNMP manager
+ An SNMP agent
+ A Management Information Base (MIB)
The Management Information Base (MIB) is a virtual information storage area for network management information, which consists of collections of managed objects.
With SNMP, the network administrator can send commands to multiple routers to do the backup.
NEW QUESTION 138
An engineer is configuring an encrypted password for the enable command on a router where the local user database has already been configured Drag and drop the configuration commands from the left into the correct sequence on the right Not all commands are used
Answer:
Explanation:
NEW QUESTION 139
Refer to the exhibit.
A packet is being sent across router R1 to host 172.16.0.14. What is the destination route for the packet?
- A. 209.165.200.246 via Serial0/1/0
- B. 209.165.200.254 via Serial0/0/1
- C. 209.165.200.250 via Serial0/0/0
- D. 209.165.200.254 via Serial0/0/0
Answer: A
NEW QUESTION 140
A router running EIGRP has learned the same route from two different paths.
Which parameter does the router use to select the best path?
- A. as-path
- B. metric
- C. cost
- D. administrative distance
Answer: B
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
NEW QUESTION 141
......
Understanding functional and technical aspects of 200-301 CCNA Exam: Cisco Certified Network Associate Permissions and Issue Level Security
The following will be discussed here:
- Roles, Permissions and Issue Level Security (25– 5% of exam)
- Manage project role membership
- Given business requirements, determine appropriate permissions for project team members
- Determine if and how issue-level security should be configured in a project
- Troubleshoot issues with roles, permissions and issue security and escalate if required
Understanding functional and technical aspects of 200-301 CCNA Exam: Cisco Certified Network Associate Network IP Connectivity
The following will be discussed here:
- Network mask
- Default route
- Host route
- Next hop
- Neighbor adjacencies
- Prefix
- Configure and verify IPv4 and IPv6 static routing
- Point-to-point
- Administrative distance
- IP Connectivity
- Floating static
- Metric
- Routing protocol metric
- Broadcast (DR/BDR selection)
- Administrative distance
- Determine how a router makes a forwarding decision by default
- Routing protocol code
- Router ID
- Configure and verify single area OSPFv2
- Longest match
- Describe the purpose of first hop redundancy protocol
- Gateway of last resort
- Network route
- Interpret the components of routing table
Verified 200-301 dumps Q&As - 100% Pass from ExamsReviews: https://www.examsreviews.com/200-301-pass4sure-exam-review.html
Pass Exam With Full Sureness - 200-301 Dumps with 216 Questions: https://drive.google.com/open?id=1qwxcuhCT7tv6dVngX2nUW-AiVOrmERO4