Free Jun-2024 UPDATED Cisco 200-301 Exam Questions & Answer
Latest Success Metrics For Actual 200-301 Exam Realistic Dumps
Cisco 200-301 exam is ideal for individuals who are interested in pursuing a career in networking or who want to enhance their existing networking skills. 200-301 exam is suitable for network administrators, network engineers, network technicians, and anyone who is responsible for managing and maintaining computer networks.
NEW QUESTION # 60
Drag and drop the AAA functions from the left onto the correct AAA services on the right
Answer:
Explanation:
NEW QUESTION # 61
Drag and drop the 802.11 wireless standards from the left onto the matching statements on the right
Answer:
Explanation:
NEW QUESTION # 62
Drag and drop the statements about networking from the left onto the corresponding networking types on the right. Not all statements are used.
Answer:
Explanation:
NEW QUESTION # 63
Which goal is achieved by the implementation of private IPv4 addressing on a network?
- A. allows communication across the Internet to other private networks
- B. allows servers and workstations to communicate across public network boundaries
- C. provides a reduction in size of the forwarding table on network routers
- D. provides an added level of protection against Internet exposure
Answer: D
NEW QUESTION # 64
Drag and drop the AAA terms from the left onto the description on the right.
Answer:
Explanation:
NEW QUESTION # 65
Drag and drop the HTTP methods used with REST-Based APIs from the left onto the descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 66
Which feature or protocol determines whether the QOS on the network is sufficient to support IP services?
- A. EEM
- B. CDP
- C. LLDP
- D. IP SLA
Answer: D
NEW QUESTION # 67
Refer to the exhibit.
With which metric was the route to host 172.16.0.202 learned?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 68
How does Cisco DNA Center gather data from the network?
- A. The Cisco CLI Analyzer tool gathers data from each licensed network device and streams it to the controller
- B. Devices establish an IPsec tunnel to exchange data with the controller
- C. Network devices use different services like SNMP, syslog, and streaming telemetry to send data to the controller
- D. Devices use the call-home protocol to periodically send data to the controller
Answer: C
Explanation:
Local Network Telemetry: Cisco DNA Center collects data from several different sources and protocols on the local network, including the following: traceroute; syslog; NetFlow; Authentication, Authorization, and Accounting (AAA); routers; Dynamic Host Configuration Protocol (DHCP); Telnet; wireless devices; Command-Line Interface (CLI); Object IDs (OIDs); IP SLA; DNS; ping; Simple Network Management Protocol (SNMP); IP Address Management (IPAM); MIB; Cisco Connected Mobile Experiences (CMX); and AppDynamics. The great breadth and depth of data collection allows Cisco DNA Center to give a clearer picture of the state of the network, clients, and applications. This data is kept on the Cisco DNA Center appliance locally (at your location) and is available for a period of 14 days. Local Network Telemetry is not transported to any other server nor is it sent to the cloud.
NEW QUESTION # 69
DRAG DROP
Answer:
Explanation:
NEW QUESTION # 70
When configuring an EtherChannel bundle, which mode enables LACP only if a LACP device is detected?
- A. Auto
- B. Passive
- C. On
- D. Active
- E. Desirable
Answer: B
Explanation:
The LACP is Link Aggregation Control Protocol. LACP is an open protocol, published under the 802.3ad.
The modes of LACP are active, passive or on. The side configured as "pasive" will waiting the other side that should an Active for the Etherchannel to be established.
PAgP is Port-Aggregation Protocol. It is Cisco proprietary protocol. The mode are On, Desirable or Auto. Desirable - Auto will establish a EtherChannel.
An example of how to configure an Etherchannel:
SwitchFormula1>enable
SwitchFormula1#configure terminal
SwitchFormula1(config)# interface range f0/5 -14
SwitchFormula1(config-if-range)# channel-group 13 mode ?
active Enable LACP unconditionally
auto Enable PAgP only if a PAgP device is detected
desirable Enable PAgP unconditionally
on Enable Etherchannel only
passive Enable LACP only if a LACP device is detected
NEW QUESTION # 71
Which command is used to specify the delay time in seconds for LLDP to initialize on any interface?
- A. lldp holdtimt
- B. lldp timer
- C. lldp reinit
- D. lldp tlv-select
Answer: D
NEW QUESTION # 72
Refer to the exhibit.
R5 is the current DR on the network, and R4 is the BDR. Their interfaces are flapping, so a network engineer wants the OSPF network to elect a different DR and BDR. Which set of configurations must the engineer implement?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: B
NEW QUESTION # 73
A packet from a company s branch office is destined to host 172.31.0.1 at headquarters. The sending router has three possible matches in its routing table for the packet prefixes: 172. 31.0 .0/16.72.31.0.0724. and 172.31
0 0/25. How does the router handle the packet?
- A. It sends the traffic via prefix 172.31.0.0/16
- B. It sends the traffic via the default gateway 0.0.0.070.
- C. It sends the traffic via prefix 172.31.0.0/24
- D. It sends the traffic via prefix 172.31.0.0/25
Answer: D
NEW QUESTION # 74
You have configured a router with an OSPF router ID, but its IP address still reflects the physical interface.
Which action can you take to correct the problem in the least disruptive way?
- A. Save the router configuration
- B. Reload the OSPF process.
- C. Reboot the router.
- D. Specify a loopback address
Answer: D
NEW QUESTION # 75
Which IPv6 address block sends packets to a group address rather than a single address?
- A. 2000::/3
- B. FF00::/8
- C. FC00::/7
- D. FE80::/10
Answer: B
Explanation:
FF00::/8 is used for IPv6 multicast and this is the IPv6 type of address the question wants to ask. FE80::/10 range is used for link-local addresses. Link-local addresses only used for communications within the local subnetwork (automatic address configuration, neighbor discovery, router discovery, and by many routing protocols). It is only valid on the current subnet. It is usually created dynamically using a link-local prefix of FE80::/10 and a 64-bit interface identifier (based on 48-bit MAC address).
NEW QUESTION # 76
Refer to the exhibit.
Router R4 is dynamically learning the path to the server. If R4 is connected to R1 via OSPF Area 20, to R2 v2ia R2 BGP, and to R3 via EIGRP 777, which path is installed in the routing table of R4?
- A. the path through R2. because the IBGP administrative distance is 200
- B. the path through R3. because the EIGRP administrative distance is lower than OSPF and BGP
- C. the path through R2 because the EBGP administrative distance is 20
- D. the path through R1, because the OSPF administrative distance is 110
Answer: C
NEW QUESTION # 77
......
Cisco 200-301 exam is the latest version of the CCNA certification exam. It was introduced in February 2020 and is designed to test the candidate’s knowledge and skills in networking fundamentals, network access, IP connectivity, IP services, security fundamentals, and automation and programmability. 200-301 exam is computer-based and consists of 120-125 questions. The time allotted for the exam is 120 minutes.
Understanding functional and technical aspects of 200-301 CCNA Exam: Cisco Certified Network Associate Network IP Connectivity
The following will be discussed here:
- Routing protocol code
- Configure and verify single area OSPFv2
- Network mask
- Default route
- Gateway of last resort
- Determine how a router makes a forwarding decision by default
- Next hop
- Floating static
- Administrative distance
- Broadcast (DR/BDR selection)
- Network route
- Prefix
- Router ID
- Describe the purpose of first hop redundancy protocol
- Routing protocol metric
- IP Connectivity
- Point-to-point
- Neighbor adjacencies
Updated 200-301 Dumps Questions For Cisco Exam: https://www.examsreviews.com/200-301-pass4sure-exam-review.html
Best Value Available Preparation Guide for 200-301 Exam: https://drive.google.com/open?id=1wyNdr5a9COs5347vMK_YVbRdCnPjcdnf