Network Appliance NS0-519 Real Exam Questions Test Engine Dumps Training With 60 Questions
NS0-519 Actual Questions Answers PDF 100% Cover Real Exam Questions
NEW QUESTION 26
You are asked to increase the size of your existing 4-node FAS8060 cluster running ONTAP 9.7 software with four additional AFF A700 nodes.
Which tool enables you to confirm that this will be a valid addition?
- A. Active IQ
- B. Hardware Universe (HWU)
- C. Active IQ Config Advisor
- D. Active IQ OneCollect
Answer: B
NEW QUESTION 27
You need to guarantee that SAN protocols are used in a new storage virtual machine (SVM).
In this scenario, which LIF service policy is required?
- A. default-cluster
- B. default-management
- C. default-data-files
- D. default-data-blocks
Answer: D
NEW QUESTION 28
You are adding a new AFF A220 FIA pair to an existing FlexPod infrastructure that is using a pair of Nexus 9332PX switches. Due to rack space constraints, the AFF A220 is to be installed in an adjoining rack, and the distance from the back of the AFF A220 to the Nexus 9332PX switches is nine meters.
In this scenario, which 10Gbe cabling solution would you use to connect the AFF A220 to the Nexus 9332PX switches?
- A. mini SAS
- B. active Twinax
- C. passive Twinax
- D. LC/LC OM4 optical
Answer: B
NEW QUESTION 29
Which protocol provides multipathing and path management for both path and target failover for NVMe over Fibre Channel (NVMe/FC)?
- A. NVMe namespaces
- B. Asynchronous Namespace Access (ANA)
- C. Asymmetric Logical Unit Access (ALUA)
- D. N_Port ID virtualization (NPIV)
Answer: B
NEW QUESTION 30
Click the Exhibit button.
You issue the cfgshow command on one of your Brocade switches and notice that there is no zoning listed under the Effective configuration. When you attempt to use the fcping command from the initiator to the target, the command fails.
Referring to the exhibit, what are two problems? (Choose two.)
- A. There is no zone defined that has both the initiator and target in a common zone.
- B. There is no zoning configured, and the default zone's access is set to No Access.
- C. The default zone access is set to allow even though zoning is defined.
- D. There is no alias for either the initiator or the target.
Answer: A,B
NEW QUESTION 31
An administrator is planning to rehost a SAN volume from one SVM to another SVM on a FAS8300 with all hard disk drives.
After rehosting the volume, what are two policies that must be reconfigured? (Choose two.)
- A. volume efficiency policy
- B. export policy
- C. caching policy
- D. snapshot policy
Answer: A,D
NEW QUESTION 32
What information should you document about your storage fabrics? (Choose two.)
- A. name service
- B. Inter-Switch Links (ISLs)
- C. zoning configuration
- D. igroup name
Answer: B,C
NEW QUESTION 33
An additional LUN is required to be created and attached to an existing VMware ESXi environment. You are asked by a VMware administrator what NetApp software would validate multi-path connections to a newly presented FC LUN.
In this scenario, which NetApp software is required?
- A. You must install Active IQ OneCollect.
- B. You must install Active IQ Config Advisor.
- C. You must install the NetApp VSC.
- D. You must Install the DSM onto the virtual machine.
Answer: D
NEW QUESTION 34
Click the Exhibit button.
You have an existing legacy Fibre Channel SAN environment and have deployed an ONTAP AFF A800 cluster. You are planning to migrate a NetApp Foreign LUN Import using the existing SAN environment.
Referring to the exhibit, how must the UTA2 ports be configured?
- A. Configure the CNA to target mode.
- B. Configure the CNA to initiator mode.
- C. Configure the FCP to initiator mode.
- D. Configure the FCP to target mode.
Answer: C
NEW QUESTION 35
A customer has decided to repurpose a NetApp FC target card from an older system. After installing the card into the newer NetApp AFF, the system kernel panics on boot.
Which tool would you use determine the problem?
- A. OnCommand Insight (OCI)
- B. Interoperability Matrix Tool (IMT)
- C. Hardware Universe (HWU)
- D. Active IQ OneCollect
Answer: C
NEW QUESTION 36
You have a 2-node AFF A220 switchless cluster serving iSCSI LUNs. NetApp Volume Encryption (NVE) is enabled on all data volumes. You are asked to consolidate identical boot LUNs that are on both controllers. You need to nondisruptively consolidate LUNs with the highest storage efficiency.
In this scenario, which NetApp ONTAP technology accomplishes this task?
- A. aggregate relocate
- B. LUN move
- C. LIF migrate
- D. volume move
Answer: D
NEW QUESTION 37
Click the Exhibit button.
Referring to the exhibit, which two Fibre Channel names should you zone on the FC switch to provide connectivity to the LUN? (Choose two.)
- A. 20:00:00:50:56:9c:16:cc
- B. 50:0a:09:82:9c:16:cc:00
- C. 50:0a:09:82:9c:7a:4e:00
- D. 20:01:00:50:56:9c:16:cc
Answer: A,D
NEW QUESTION 38
Click the Exhibit button.
You need to perform an automated non-disruptive upgrade from ONTAP 9.5 to ONTAP 9.7.
Referring to the exhibit, which tool would be used?
- A. Upgrade Advisor
- B. AutoSupport OnDemand
- C. Perfstat
- D. OneCollect
Answer: A
NEW QUESTION 39
Which two SAN components are inventoried by Active IQ OneCollect? (Choose two.)
- A. FC switches
- B. fans
- C. power supply
- D. storage controller
Answer: A,D
NEW QUESTION 40
You have a Windows 2016 server that you want to boot from an iSCSI LUN presented from an AFF A700.
To configure boot from SAN, where would you find the information to populate the NetApp igroup?
- A. network switch
- B. server BIOS
- C. iSCSI HBA BIOS
- D. Windows iSCSI initiator
Answer: D
NEW QUESTION 41
You must ensure that a cluster that uses FabricPool has high availability,
What is required to accomplish this task?
- A. an IPspace that is dedicated to the FabricPool
- B. a cloud bucket
- C. four cluster LIFs
- D. a local failover policy for intercluster LIFs
Answer: D
NEW QUESTION 42
You have a new 2-node AFF All SAN Array A700 cluster serving iSCSI LUNs. You are asked to test failures of the front-end protocol connections.
Which two actions satisfy the failure criteria? (Choose two.)
- A. Disable Snapshot policies.
- B. Perform a storage controller failover.
- C. Pull an Ethernet cable from a storage port with a cluster LIF.
- D. Pull an Ethernet cable from a Linux host.
Answer: B,D
NEW QUESTION 43
You have an SVM serving LUNs to your VMware environment. You have configured the SAN LIFs, zoning, and multipath by using industry best practices. You need to temporarily migrate a SAN LIF to another host, preserving the SAN LIF's WWPN. You do not want to lose access to the LUNs during LIF migration.
In this scenario, what are three required steps that are needed to accomplish this task? (Choose three.)
- A. Set the new home node and home port in the LIF.
- B. Update the zone using the WWPN of the destination host's physical port.
- C. Bring the LIF online.
- D. Take the LIF offline.
- E. Nondisruptively migrate the LIF to the destination host.
Answer: A,C,D
NEW QUESTION 44
......
ExamsReviews NS0-519 Exam Practice Test Questions : https://www.examsreviews.com/NS0-519-pass4sure-exam-review.html