Pay attention to our Valid and Useful Exam Reviews and take our Exam Torrent as your Study Material. With little time and energy investment, you have a High Efficiency Study experience. Pass your Actual Test with the help of our Actual Reviews.

Pass 300-730 Exam Latest Practice Questions Updated on Oct 31, 2022 [Q13-Q32]

Share

Pass 300-730 Exam Latest Practice Questions Updated on Oct 31, 2022

Cisco 300-730 Study Guide Archives 


What is the Cisco 300-730 Exam?

Implementing secure solutions with virtual private networks is key to modern operating environments, and the 300-730 Exam certifies the knowledge and skills necessary to build a secure infrastructure based on Cisco technologies. This certification also establishes mastery of device configuration, monitoring, diagnosis, and troubleshooting, as well as knowledge of network policies, security threats, and mitigation techniques.


The associate exam 300-730 or Implementing Secure Solutions with Virtual Private Networks is linked to the CCNP Security certificate. It helps candidates to figure out how well they can implement secure remote communications with VPN solutions. Some of the areas tested in this exam include security for communication, architecture, and troubleshooting.

 

NEW QUESTION 13
What is a requirement for smart tunnels to function properly?

  • A. Java or ActiveX must be enabled on the client machine.
  • B. Applications must be UDP.
  • C. Stateful failover must not be configured.
  • D. The user on the client machine must have admin access.

Answer: A

Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation- firewalls/111007-smart-tunnel-asa-00.html

 

NEW QUESTION 14

Refer to the exhibit. An engineer is troubleshooting a new GRE over IPsec tunnel. The tunnel is established but the engineer cannot ping from spoke 1 to spoke 2. Which type of traffic is being blocked?

  • A. ESP packets from spoke2 to spoke1
  • B. ESP packets from spoke1 to spoke2
  • C. ISAKMP packets from spoke2 to spoke1
  • D. ISAKMP packets from spoke1 to spoke2

Answer: A

Explanation:
Section: Troubleshooting using ASDM and CLI

 

NEW QUESTION 15
Which VPN solution uses TBAR?

  • A. DMVPN
  • B. GETVPN
  • C. Cisco AnyConnect
  • D. VTI

Answer: B

 

NEW QUESTION 16
What is a requirement for smart tunnels to function properly?

  • A. Java or ActiveX must be enabled on the client machine.
  • B. Applications must be UDP.
  • C. Stateful failover must not be configured.
  • D. The user on the client machine must have admin access.

Answer: A

Explanation:
Section: Secure Communications Architectures
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation- firewalls/111007-smart-tunnel-asa-00.html

 

NEW QUESTION 17
Drag and drop the correct commands from the night onto the blanks within the code on the left to implement a design that allow for dynamic spoke-to-spoke communication. Not all comments are used.

Answer:

Explanation:

Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/xe-16/sec-conn-dmvpn-xe-16-book/sec-conn-dmvpn-summ-maps.html

 

NEW QUESTION 18
Which two statements about the Cisco ASA Clientless SSL VPN solution are true? (Choose two.)

  • A. The rewriter enable command under the global webvpn configuration enables the rewriter functionality because that feature is disabled by default.
  • B. Clientless SSLVPN provides Layer 3 connectivity into the secured network.
  • C. A Cisco ASA can simultaneously allow Clientless SSL VPN sessions and AnyConnect client sessions.
  • D. When a client connects to the Cisco ASA WebVPN portal and tries to access HTTP resources through the URL bar, the client uses the local DNS to perform FQDN resolution.
  • E. When a client connects to the Cisco ASA WebVPN portal and tries to access HTTP resources through the URL bar, the ASA uses its configured DNS servers to perform FQDN resolution.

Answer: C,E

 

NEW QUESTION 19
Which requirement is needed to use local authentication for Cisco AnyConnect Secure Mobility Clients that connect to a FlexVPN server?

  • A. use of certificates instead of username and password
  • B. AnyConnect profile
  • C. EAP-AnyConnect
  • D. EAP query-identity

Answer: B

Explanation:
Section: Remote access VPNs
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect-IKEv2- Remote-Access.html

 

NEW QUESTION 20

Refer to the exhibit. Based on the debug output, which type of mismatch is preventing the VPN from coming up?

  • A. PFS
  • B. preshared key
  • C. lifetime
  • D. interesting traffic

Answer: C

Explanation:
Section: Troubleshooting using ASDM and CLI
Explanation:
If the responder's policy does not allow it to accept any part of the proposed Traffic Selectors, it responds with a TS_UNACCEPTABLE Notify message.

 

NEW QUESTION 21
Refer to the exhibit.

A network engineer is configuring a remote access SSLVPN and is unable to complete the connection using local credentials. What must be done to remediate this problem?

  • A. Configure the group policy to force local authentication.
  • B. Change the authentication method to local.
  • C. Enable the client protocol in the Cisco AnyConnect profile.
  • D. Configure a AAA server group to authenticate the client.

Answer: C

 

NEW QUESTION 22
Refer to the exhibit.

Which VPN technology is used in the exhibit?

  • A. DMVPN
  • B. GRE
  • C. VTI
  • D. DVTI

Answer: C

 

NEW QUESTION 23
Which method dynamically installs the network routes for remote tunnel endpoints?

  • A. route filtering
  • B. reverse route injection
  • C. CEF
  • D. policy-based routing

Answer: B

 

NEW QUESTION 24
Refer to the exhibit.

Which value must be configured in the User Group field when the Cisco AnyConnect Profile is created to connect to an ASA headend with IPsec as the primary protocol?

  • A. tunnel-group
  • B. group-policy
  • C. group-alias
  • D. address-pool

Answer: A

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect41/ administration/guide/b_AnyConnect_Administrator_Guide_4-1/configure-vpn.html

 

NEW QUESTION 25
Where is split tunneling defined for IKEv2 remote access clients on a Cisco router?

  • A. virtual template
  • B. Group Policy
  • C. webvpn context
  • D. IKEv2 authorization policy

Answer: B

 

NEW QUESTION 26
Which redundancy protocol must be implemented for IPsec stateless failover to work?

  • A. GLBP
  • B. HSRP
  • C. SSO
  • D. VRRP

Answer: B

Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/17826- ipsec-feat.html

 

NEW QUESTION 27
A network engineer has been tasked with configuring SSL VPN to provide remote users with access to the corporate network. Traffic destined to the enterprise IP range should go through the tunnel, and all other traffic should go directly to the Internet. Which feature should be configured to achieve this?

  • A. dual-homing
  • B. hairpinning
  • C. U-turning
  • D. split-tunnel

Answer: D

 

NEW QUESTION 28
A Cisco AnyConnect client establishes a SSL VPN connection with an ASA at the corporate office. An engineer must ensure that the client computer meets the enterprise security policy. Which feature can update the client to meet an enterprise security policy?

  • A. Basic Host Scan
  • B. Cisco Secure Desktop
  • C. Advanced Endpoint Assessment
  • D. Endpoint Assessment

Answer: C

Explanation:
Section: Remote access VPNs

 

NEW QUESTION 29
Which method dynamically installs the network routes for remote tunnel endpoints?

  • A. route filtering
  • B. reverse route injection
  • C. CEF
  • D. policy-based routing

Answer: B

Explanation:
Section: Site-to-site Virtual Private Networks on Routers and Firewalls Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_vpnav/configuration/12-4t/sec-vpn- availability-12-4t-book/sec-rev-rte-inject.html

 

NEW QUESTION 30
Which IKE identity does an IOS/IOS-XE headend expect to receive if an IPsec Cisco AnyConnect client uses default settings?

  • A. *$AnyConnectClient$*
  • B. *$DfltlkeldentityS*
  • C. *$RemoteAccessVpnClient$*
  • D. *$SecureMobilityClient$*

Answer: A

Explanation:
Section: Remote access VPNs
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect- IKEv2-Remote-Access.html

 

NEW QUESTION 31
Which technology works with IPsec stateful failover?

  • A. GRE
  • B. HSRP
  • C. GLBR
  • D. VRRP

Answer: B

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/12_2/12_2y/12_2yx11/feature/guide/ ft_vpnha.html#wp1122512

 

NEW QUESTION 32
......

300-730 Questions Prepare with Learning Information: https://www.examsreviews.com/300-730-pass4sure-exam-review.html

Download 300-730 Mock Test Study Material: https://drive.google.com/open?id=1ON6rEjqTUuDuPhmhcGh0KzZIdKaFJ2EW