SK0-005 Practice Test Give You First Time Success with 100% Money Back Guarantee!
All Obstacles During SK0-005 Exam Preparation with SK0-005 Real Test Questions
For more info read reference
CompTIA SK0-005 Certification Exam
CompTIA Server+ Certification Exam (SK0-005) is a globally recognized certification exam that validates the skills and knowledge required for server management and administration. SK0-005 exam is designed to test the candidate's ability to install, configure, operate, and maintain servers, storage, and other infrastructure components. Successful completion of SK0-005 exam enables an IT professional to demonstrate their expertise to potential employers and clients, making them more valuable to the organization.
NEW QUESTION # 74
An administrator needs to disable root login over SSH. Which of the following tiles should be edited to complete this task?
- A. /etc.ssh/sshd_config
- B. /etc.sshs_shd_config
- C. /root/.ssh/ssh_config
- D. /root.ssh/sshd/config
Answer: A
Explanation:
To disable root login over SSH, the server administrator needs to edit the SSH configuration file located at /etc/ssh/sshd_config. This file contains various settings for the SSH daemon that runs on the server and accepts incoming SSH connections. The administrator needs to find the line that says PermitRootLogin and change it to no or comment it out with a # symbol. Then, the administrator needs to restart the SSH service for the changes to take effect. Reference: https://www.howtogeek.com/828538/how-and-why-to-disable-root-login-over-ssh-on-linux/
NEW QUESTION # 75
A server administrator is exporting Windows system files before patching and saving them to the following location:
\\server1\ITDept\
Which of the following is a storage protocol that the administrator is MOST likely using to save this data?
- A. SAS
- B. CIFS
- C. FCoE
- D. eSATA
Answer: B
Explanation:
The storage protocol that the administrator is most likely using to save data to the location \server1\ITDept\ is CIFS. CIFS (Common Internet File System) is a protocol that allows file sharing and remote access over a network. CIFS is based on SMB (Server Message Block), which is a protocol that enables communication between devices on a network. CIFS uses UNC (Universal Naming Convention) paths to identify network resources, such as files or folders. A UNC path has the format \servername\sharename\path\filename. In this case, server1 is the name of the server, ITDept is the name of the shared folder, and \ is the path within the shared folder.
NEW QUESTION # 76
A technician has moved a data drive from a new Windows server to an older Windows server. The hardware recognizes the drive, but the data is not visible to the OS. Which of the following is the most likely cause of the issue?
- A. The disk uses MBR.
- B. The partition is formatted with FAT32.
- C. The disk uses GPT.
- D. The partition is formatted with ext4.
Answer: C
Explanation:
Explanation
The most likely cause of the issue is that the disk uses GPT. GPT stands for GUID Partition Table, which is a newer standard for disk partitioning that supports larger disks and more partitions than the older MBR (Master Boot Record) standard1. However, GPT is not compatible with some older operating systems, such as Windows XP or Windows Server 20032. Therefore, if the data drive was formatted with GPT on a new Windows server and then moved to an older Windows server, the older server may not be able to recognize the GPT partitions and access the data on the drive.
The partition being formatted with ext4, FAT32, or MBR are not likely causes of the issue. Ext4 is a file system that is commonly used on Linux-based systems, but it can also be read by Windows with some third-party software3. FAT32 is a file system that is widely compatible with most operating systems and devices, but it has some limitations such as a maximum file size of 4 GB and a maximum partition size of 8 TB4. MBR is not a file system, but a partitioning scheme that can support various file systems such as NTFS, FAT32, or exFAT5. However, MBR has some disadvantages compared to GPT, such as a maximum disk size of 2 TB and a maximum number of primary partitions of four1.
NEW QUESTION # 77
Which of me following is the BEST action to perform before applying patches to one of the hosts in a high availability cluster?
- A. Set the cluster to active-active.
- B. Disable the heartbeat network.
- C. Failover all VMs.
- D. Fallback cluster services.
Answer: C
NEW QUESTION # 78
An administrator needs to perform bare-metal maintenance on a server in a remote datacenter.
Which of the following should the administrator use to access the server's console?
- A. A crash cart
- B. VNC
- C. IP KVM
- D. RDP
- E. SSH
Answer: C
Explanation:
KVM-over-IP switches are the remote access version of local KVM (keyboard/video/mouse) devices. They allow administrators to control a remote system by sending keyboard and mouse signals over the network and displaying the remote system's video output on the administrator's local machine via a web browser. Administrators can perform almost any function on the remote system as long as it's powered on and connected to the network.
NEW QUESTION # 79
A systems administrator has noticed performance degradation on a company file server, and one of the disks on it has a solid amber light. The administrator logs on to the disk utility and sees the array is rebuilding. Which of the following should the administrator do NEXT once the rebuild is finished?
- A. Restore the server from backup.
- B. Restore the server from a snapshot.
- C. Swap the drive and initialize the array.
- D. Swap the drive and initialize the disk.
Answer: D
NEW QUESTION # 80
An administrator is only able to log on to a server with a local account. The server has been successfully joined to the domain and can ping other servers by IP address. Which of the following locally defined settings is MOST likely misconfigured?
- A. DHCP
- B. WINS
- C. TCP
- D. DNS
Answer: D
Explanation:
Explanation
This is the most likely misconfigured setting because DNS is the service that resolves hostnames to IP addresses and vice versa. If the DNS server is incorrect or unreachable, the administrator will not be able to log on to the server with a domain account because the server will not be able to authenticate with the domain controller. References:
https://docs.microsoft.com/en-us/troubleshoot/windows-server/networking/dns-troubleshooting
NEW QUESTION # 81
A technician is able to copy a Me to a temporary folder on another partition but is unable to copy it to a network share or a USB flash drive. Which of the following is MOST likely preventing the file from being copied to certain locations?
- A. DLP
- B. An ACL
- C. A firewall
- D. Antivirus
Answer: A
Explanation:
DLP (Data Loss Prevention) is a security measure that prevents unauthorized copying, transferring, or leaking of sensitive data from a server or a network. It can block or alert the user when they try to copy a file to certain locations, such as a network share or a USB flash drive, based on predefined policies and rules. Verified Reference: [DLP], [Data loss]
NEW QUESTION # 82
A company is building a new datacenter next to a busy parking lot. Which of the following is the BEST strategy to ensure wayward vehicle traffic does not interfere with datacenter operations?
- A. Install a mantrap
- B. Utilize security guards
- C. Install bollards
- D. Install security cameras
Answer: C
Explanation:
Explanation
The best strategy to ensure wayward vehicle traffic does not interfere with datacenter operations is to install bollards. Bollards are sturdy posts that are installed around a perimeter to prevent vehicles from entering or crashing into a protected area. Bollards can provide physical security and deterrence for datacenters that are located near busy roads or parking lots. Bollards can also prevent accidental damage or injury caused by vehicles that lose control or have faulty brakes.
NEW QUESTION # 83
A server technician is installing a Windows server OS on a physical server. The specifications for the installation call for a 4TB data volume. To ensure the partition is available to the OS, the technician must verify the:
- A. volume is spanned across multiple physical disk drives
- B. hardware is UEFI compliant
- C. volume is formatted as GPT
- D. volume is formatted as MBR
Answer: B
NEW QUESTION # 84
A server technician is configuring the IP address on a newly installed server. The documented configuration specifies using an IP address of 10.20.10.15 and a default gateway of 10.20.10.254. Which of the following subnet masks would be appropriate for this setup?
- A. 255.255.255.0
- B. 255.255.255.240
- C. 255.255.255.128
- D. 255.255.255.254
Answer: D
Explanation:
Reference:
https://www.calculator.net/ip-subnet-calculator.html? cclass=any&csubnet=30&cip=10.20.10.15&ctype=ipv4&printit=0&x=57&y=17
NEW QUESTION # 85
A Linux administrator created a script that will run at startup. After successfully writing the script, the administrator received me following output when trying to execute the script:
Bash ./startup,sh:Permission denied
Which of the following commands would BEST resolve the error message?
- A. Chmod 466 startUp,sh
- B. Chmod+x startup.sh
- C. Chmod +w startup.sh
- D. Chmod 444 startup.sh
Answer: B
Explanation:
This is the command that would best resolve the error message "Bash ./startup.sh: Permission denied" when trying to execute a script on Linux. Chmod is a command that changes the permissions of files or directories on Linux. +x is an option that adds the execute permission to the file or directory for the owner, group, and others. startup.sh is the name of the script file that needs to be executed. By running chmod +x startup.sh, the technician grants execute permission to the script file and allows it to be run by any user. Chmod +w startup.sh would add write permission to the file, but not execute permission. Chmod 444 startup.sh would set read-only permission for all users, but not execute permission. Chmod 466 startup.sh would set read and write permission for the owner and write-only permission for group and others, but not execute permission. Reference: https://www.howtogeek.com/437958/how-to-use-the-chmod-command-on-linux
NEW QUESTION # 86
A systems administrator deployed a new web proxy server onto the network. The proxy server has two interfaces: the first is connected to an internal corporate firewall, and the second is connected to an internet-facing firewall. Many users at the company are reporting they are unable to access the Internet since the new proxy was introduced. Analyze the network diagram and the proxy server's host routing table to resolve the Internet connectivity issues.
INSTRUCTIONS
Perform the following steps:
1. Click on the proxy server to display its routing table.
2. Modify the appropriate route entries to resolve the Internet connectivity issue.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Answer:
Explanation:
NEW QUESTION # 87
Winch of the following is a type of replication in which all files are replicated, all the time?
- A. Constant
- B. Full
- C. Application consistent
- D. Synthetic full
Answer: A
Explanation:
Explanation
Constant replication is a type of replication in which all files are replicated, all the time. Replication is a process of copying data from one location to another for backup, recovery, or distribution purposes. Constant replication is also known as real-time replication or synchronous replication. It ensures that any changes made to the source data are immediately reflected on the target data without any delay or lag. Constant replication provides high availability and consistency, but it requires high bandwidth and low latency. Application consistent replication is a type of replication that ensures that the replicated data is consistent with the state of the application that uses it. It involves quiescing or pausing the application before taking a snapshot of the data and resuming the application after the snapshot is taken. Application consistent replication provides better recovery point objectives than crash consistent replication, which does not quiesce the application before taking a snapshot. Synthetic full replication is a type of replication that involves creating a new full backup by using the previous full backup and related incremental backups. It reduces the backup window and network bandwidth consumption by transferring only changed data from the source to the target. Full replication is a type of replication that involves copying all data from the source to the target regardless of whether it has changed or not. It provides a complete backup of the data, but it requires more storage space and network bandwidth than incremental or differential replication. References:
https://www.howtogeek.com/199068/how-to-upgrade-your-existing-hard-drive-in-under-an-hour/
https://www.howtogeek.com/202794/what-is-the-difference-between-127.0.0.1-and-0.0.0.0/
https://www.howtogeek.com/443611/how-to-encrypt-your-macs-system-drive-removable-devices-and-individua
NEW QUESTION # 88
A technician recently upgraded several pieces of firmware on a server. Ever since the technician rebooted the server, it no longer communicates with the network. Which of the following should the technician do FIRST to return the server to service as soon as possible?
- A. Downgrade the NIC firmware
- B. Reseat the NIC
- C. Replace the NIC
- D. Make sure the NIC is on the HCL
Answer: A
Explanation:
Explanation
The first thing that the technician should do to return the server to service as soon as possible is downgrade the NIC firmware. Firmware is a type of software that controls the basic functions of hardware devices, such as network interface cards (NICs). Firmware updates can provide bug fixes, performance improvements, or new features for hardware devices. However, firmware updates can also cause compatibility issues, configuration errors, or functionality failures if they are not installed properly or if they are not compatible with the device model or driver version. Downgrading the firmware means reverting to an older version of firmware that was previously working fine on the device. Downgrading the firmware can help resolve any problems caused by a faulty firmware update and restore normal operation of the device.
NEW QUESTION # 89
......
CompTIA SK0-005 exam is a certification test that validates the knowledge and skills of IT professionals who work with server technology. SK0-005 exam is designed by CompTIA, which is a leading provider of IT certifications globally. The CompTIA Server+ certification is a sought-after credential for professionals who want to enhance their career prospects in server administration, maintenance, and troubleshooting.
Fully Updated Free Actual CompTIA SK0-005 Exam Questions: https://www.examsreviews.com/SK0-005-pass4sure-exam-review.html
Free SK0-005 Questions for CompTIA SK0-005 Exam [Oct-2023]: https://drive.google.com/open?id=15FcV9hNubKrCon8Ub0Gv76pOpmRrrOhG