Regular Free Updates 350-401 Dumps Real Exam Questions Test Engine Oct 21, 2023
Practice Test Questions Verified Answers As Experienced in the Actual Test!
Cisco 350-401 exam is a challenging test that requires a deep understanding of network technologies and protocols. IT professionals who pass 350-401 exam demonstrate their ability to design, implement, and manage complex enterprise network solutions, making them valuable assets to their organizations. Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) certification obtained from passing 350-401 exam is recognized worldwide and can open up many career opportunities for IT professionals in the networking field.
NEW QUESTION # 136
Drag and drop the wireless elements on the left to their definitions on the right.
Answer:
Explanation:
NEW QUESTION # 137 
Refer to the exhibit. Which two commands are needed to allow for full reachability between AS 1000 and AS
2000? (Choose two)
- A. R2#network 209.165.201.0 mask 255.255.192.0
- B. R1#network 19.168.0.0 mask 255.255.0.0
- C. R2#no network 10.0.0.0 255.255.255.0
- D. R2#network 19.168.0.0 mask 255.255.0.0
- E. R1#no network 10.0.0.0 255.255.255.0
Answer: C,D
NEW QUESTION # 138
What is the differences between TCAM and the MAC address table?
- A. The MAC address table supports partial matches. TCAM requires an exact match
- B. Router prefix lookups happens in CAM. MAC address table lookups happen in TCAM.
- C. The MAC address table is contained in CAM ACL and QoS information is stored in TCAM
- D. TCAM is used to make Layer 2 forwarding decisions CAM is used to build routing tables
Answer: C
Explanation:
Explanation
https://community.cisco.com/t5/networking-documents/cam-content-addressable-memory-vs-tcam-ternary-conte
NEW QUESTION # 139
What is a consideration when designing a Cisco SD-Access underlay network?
- A. It must support IPv4 and IPv6 underlay networks
- B. End user subnets and endpoints are part of the underlay network.
- C. Static routing is a requirement,
- D. The underlay switches provide endpoint physical connectivity for users.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-sda-design-guide.html#Underlay
NEW QUESTION # 140
Refer to the exhibit.
Only administrators from the subnet 10.10.10.0/24 are permitted to have access to the router. A secure protocol must be used for the remote access and management of the router instead of clear-text protocols. Which configuration achieves this goal?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: B
NEW QUESTION # 141
Drag and drop characteristics of PIM dense mode from the left to the right.
Answer:
Explanation:
Explanation
A picture containing diagram Description automatically generated
PIM-DM supports only source trees - that is, (S,G) entries-and cannot be used to build a shared distribution tree.
NEW QUESTION # 142
Refer to the exhibit.
Assuming that R is a CE router, which VRF is assigned to Gi0/0 on R1?
- A. Management VRF
- B. VRF VPN_B
- C. VRF VPN_A
- D. Default VRF
Answer: D
NEW QUESTION # 143
Drag and drop the snippets onto the blanks within the code to construct a script that configures BGP according to the topology. Not all options are used, and some options may be used twice.
Answer:
Explanation:
Explanation
Graphical user interface, text, application, email Description automatically generated
NEW QUESTION # 144
Drag and drop the DHCP messages that are exchanged between a client and an AP into the order they are exchanged on the right.
Answer:
Explanation:
Explanation
Table Description automatically generated
There are four messages sent between the DHCP Client and DHCP Server: DHCPDISCOVER, DHCPO FFER, DHCPREQUEST and DHCPACKNOWLEDGEMENT.
This process is often abbreviated as DORA (for Discover, Offer, Request, Acknowledgement).
NEW QUESTION # 145
Drag and drop the characteristics from the left onto the orchestration tools they describe on the right.
Answer:
Explanation:
NEW QUESTION # 146
Drag and drop the descriptions from the left onto the routing protocol they describe on the right.
Answer:
Explanation:
NEW QUESTION # 147
Drag and drop the description from the left onto the correct QoS components on the right.
Answer:
Explanation:
Explanation
Traffic Policing: Drops excessive Traffic, causes TCP retransmissions, introduce no delay/jitter Shaping: buffers, excessive traffic, introduce delay and jitter, typically delays, rather than drops traffic
NEW QUESTION # 148
Drag and drop the characteristics from the left onto the infrastructure types on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 149
Refer to the exhibit.
Which configuration allows Customer2 hosts to access the FTP server of Customer1 that has the IP address of 192.168.1.200?
- A. ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 Customer1
ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 Customer2 - B. ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 global
ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 global
ip route 192.168.1.0 255.255.255.0 Vlan10
ip route 172.16.1.0 255.255.255.0 Vlan20 - C. ip route vrf Customer1 172.16.1.1 255.255.255.255 172.16.1.1 global
ip route vrf Customer 192.168.1.200 255.255.255.0 192.168.1.1 global
ip route 192.168.1.0 255.255.255.0 Vlan10
ip route 172.16.1.0 255.255.255.0 Vlan20 - D. ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 Customer2
ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 Customer1
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/200158-Configure-Route-Leaking-between-Global-a.html
Static routes directly between VRFs are not supported so we cannot configure a direct static route between two VRFs.
The command "ip route vrf Customer1 172.16.1.0 255.255.255.0 172.16.1.1 global" means in VRF Customer1, in order to reach destination 172.16.1.0/24 then we uses the next hop IP address 172.16.1.1 in the global routing table. And the command "ip route 192.168.1.0 255.255.255.0 Vlan10" tells the router "to reach 192.168.1.0/24, send to Vlan 10".
NEW QUESTION # 150
Drag and drop the descriptions from the left onto the QoS components they describe on the right.
Answer:
Explanation:
NEW QUESTION # 151
Drag and drop the characteristics from the left onto the orchestration tools they describe on the right.
Answer:
Explanation:
NEW QUESTION # 152
Drag and drop the characteristics from the left onto the orchestration tools they describe on the right.
Answer:
Explanation:
NEW QUESTION # 153
Drag and drop the LISP components from the left onto the function they perform on the right. Not all options are used.
Answer:
Explanation:
Explanation
+ accepts LISP encapsulated map requests: LISP map resolver
+ learns of EID prefix mapping entries from an ETR: LISP map server
+ receives traffic from LISP sites and sends it to non-LISP sites: LISP proxy ETR
+ receives packets from site-facing interfaces: LISP ITR
Explanation
ITR is the function that maps the destination EID to a destination RLOC and then encapsulates the original packet with an additional header that has the source IP address of the ITR RLOC and the destination IP address of the RLOC of an Egress Tunnel Router (ETR).
After the encapsulation, the original packet become a LISP packet.
ETR is the function that receives LISP encapsulated packets, decapsulates them and forwards to its local EIDs. This function also requires EID-to-RLOC mappings so we need to point out an "map-server" IP address and the key (password) for authentication.
A LISP proxy ETR (PETR) implements ETR functions on behalf of non-LISP sites. A PETR is typically used when a LISP site needs to send traffic to non-LISP sites but the LISP site is connected through a service provider that does not accept no routable EIDs as packet sources. PETRs act just like ETRs but for EIDs that send traffic to destinations at non-LISP sites.
Map Server (MS) processes the registration of authentication keys and EID-to-RLOC mappings. ETRs sends periodic Map-Register messages to all its configured Map Servers.
Map Resolver (MR): a LISP component which accepts LISP Encapsulated Map Requests, typically from an ITR, quickly determines whether or not the destination IP address is part of the EID namespace
NEW QUESTION # 154
Drag and drop the characteristics from the left onto the correct infrastructure deployment types on the right.
Answer:
Explanation:
NEW QUESTION # 155
The login method is configured on the VTY lines of a router with these parameters.
* The first method for authentication is TACACS
* If TACACS is unavailable, login is allowed without any provided credentials Which configuration accomplishes this task?
- A. Option A
- B. Option C
- C. Option D
- D. Option B
Answer: B
NEW QUESTION # 156
Refer to the exhibit.
An engineer must ensure that all traffic leaving AS 200 will choose Link 2 as an entry point. Assuming that all BGP neighbor relationships have been formed and that the attributes have not been changed on any of the routers, which configuration accomplish task?
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: B
NEW QUESTION # 157
What does this EEM applet event accomplish?
"event snmp oid 1.3.6.1.3.7.1.5.1.2.4.2.9 get-type next entry-op g entry-val 75 poll-interval 5"
- A. It reads an SNMP variable, and when the value exceeds 75% for live polling cycles.
- B. Upon the value reaching 75%, a SNMP event is generated and sent to the trap server.
- C. It presents a SNMP variable that can be interrogated.
- D. It issues email when the value is greater than 75% for five polling cycles.
Answer: A
Explanation:
Explanation
EEM offers the ability to monitor events and take informational or corrective action when the monitored events occur or reach a threshold. An EEM policy is an entity that defines an event and the actions to be taken when that event occurs. There are two types of EEM policies: an applet or a script. An applet is a simple form of policy that is defined within the CLI configuration.
To specify the event criteria for an Embedded Event Manager (EEM) applet that is run by sampling Simple Network Management Protocol (SNMP) object identifier values, use the event snmp command in applet configuration mode.
event snmp oid oid-value get-type {exact | next} entry-op operator entry-val entryvalue
[exit-comb {or | and}] [exit-op operator] [exit-val exit-value] [exit-time exit-timevalue] poll-interval poll-int-value
+ oid: Specifies the SNMP object identifier (object ID)
+ get-type: Specifies the type of SNMP get operation to be applied to the object ID specified by the oid-value argument.
- next - Retrieves the object ID that is the alphanumeric successor to the object ID specified by the oid-value argument.
+ entry-op: Compares the contents of the current object ID with the entry value using the specified operator. If there is a match, an event is triggered and event monitoring is disabled until the exit criteria are met.
+ entry-val: Specifies the value with which the contents of the current object ID are compared to decide if an SNMP event should be raised.
+ exit-op: Compares the contents of the current object ID with the exit value using the specified operator. If there is a match, an event is triggered and event monitoring is reenabled.
+ poll-interval: Specifies the time interval between consecutive polls (in seconds) Reference: https://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gtioseem.html Question 2
NEW QUESTION # 158
How does SSO work with HSRP to minimize network disruptions?
- A. It enables HSRP to elect another switch in the group as the active HSRP switch.
- B. It enables HSRP to failover to the standby RP on the same device.
- C. It ensures fast failover in the case of link failure.
- D. It enables data forwarding along known routes following a switchover, white the routing protocol reconverges.
Answer: A
Explanation:
NEW QUESTION # 159
Refer to the exhibit.
Refer to the exhibit. Traffic is not passing between SW1 and SW2. Which action fixes the issue?
- A. Configure switch port mode to ISL on S2.
- B. Configure PAgP mode on S1 to desirable.
- C. Configure LACP mode on S1 to passive.
- D. Configure LACP mode on S1 to active.
Answer: B
NEW QUESTION # 160
An engineer configures HSRP group 37. The configuration does not modify the default virtual MAC address.
Which virtual MAC address does the group use?
- A. 00:00:0c:07:ac:25
- B. 00:00:0c:07:ac:37
- C. C0.00:00:25:00:00
- D. C0:39:83:25:258:5
Answer: A
NEW QUESTION # 161
......
Cisco 350-401 exam is part of the new CCNP Enterprise certification path and is designed for network engineers who are interested in advancing their skills and knowledge of Cisco Enterprise Network technologies. 350-401 exam is essential for professionals who want to take their career to the next level and become experts in implementing and managing Cisco Enterprise Networks.
Pass Cisco 350-401 Exam in First Attempt Easily: https://www.examsreviews.com/350-401-pass4sure-exam-review.html
The Most Efficient 350-401 Pdf Dumps For Assured Success : https://drive.google.com/open?id=10xpH_gkOgdae1cEqUVdhtVbR1AywLJRm